进口SMC标准气缸,SMC气缸分类 [产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 进口SMC标准气缸,SMC气缸分类
产品型号: CDA2B100-200-Y59BZ-XC4
产品展商: SMC
简单介绍
进口SMC标准气缸,SMC气缸分类 The spring that is built into the cylinder provides only enough force to retract the piston rod. Thus, if a load is applied,

进口SMC标准气缸,SMC气缸分类的详细介绍

进口SMC标准气缸,SMC气缸分类
The following fittings are recommended for this cylin-
der connection. However, there may be a case where
the piston speed exceeds 500 mm/sec. even with the
recommended fittings for this cylinder. Use a speed
controller in such cases
q Fit an auto switch into the auto switch
mounting groove to set it roughly to the
mounting position for an auto switch.
In addition to the above fittings and hose nipples, the
below fittings can also be attached to the cylinder.
When using the below fittings be sure to provide a
speed controller after adjusting it to 500 mm/s or less.
w After reconfirming the detecting position,
tighten the auto switch mounting screw∗ to
secure the auto switch.
e Modification of the detecting position
should be made in the condition of q.
When tightening an auto switch mounting screw,
use a watchmaker’s screwdriver with a handle of
approximately 5 to 6 mm in diameter.
(Use a tightening torque of approximately 0.10 to 0.20 N·m.)
Tightening torque for auto switch
Do not use it in such a way that a load could be ap-
plied to the piston rod during the retraction.
the piston rod may not be able to retract to
the end of the stroke.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

进口SMC标准气缸,SMC气缸分类 [产品打印页面]

进口SMC标准气缸,SMC气缸分类 的详细介绍

进口SMC标准气缸,SMC气缸分类的详细介绍