SMC薄型气缸，CDQ2B125-75DCM[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SMC薄型气缸，CDQ2B125-75DCM
产品型号: -
产品展商: SMC
简单介绍
SMC薄型气缸，CDQ2B125-75DCM 消耗功率减少MAX.40%※(与本公司产品相比) 冷媒：R134a(HFC)〔IDF1E～15E/IDU3E～15E〕 R407C(HFC)〔IDF22E～240D/IDU22E～75E〕

SMC薄型气缸，CDQ2B125-75DCM的详细介绍

SMC薄型气缸，CDQ2B125-75DCM
冷媒：R134a(HFC)、R407C(HFC)臭氧破坏系数“0”。
采用不锈钢制热交换器，提高耐腐蚀性(IDFA4E～75E)
系列/CAD 处理空气量 m3/h (ANR) 适合规格
37ºF (2.8℃) 45ºF (7.2℃) 50ºF (10℃)
IDFB3E～37E 10 (17)～161 (273)
11 (19)～173 (294) 12 (20)～181 (308) UL,CSA
注1)进口压力0.7MPa，35℃进口温度(饱和)，流量时。
注2)还有AC100,110,200V可供选择。
Use outside Japan is not allowed.
The AT series air tank is in compliance
with the regulations in Japan (Class 2
Pressure Vessel), but is not in
compliance with related regulations
outside Japan. (This is also applicable
when the series is used as a unit.)
Please consult with SMC for use of air
tanks outside Japan.
An air tank made of stainless steel and
horizontal type with a same capacity
as the standard type are available
upon request. Contact SMC separately.
电源电压：单相AC115V、230V (60Hz)
冷媒：R134a (HFC)、R407C (HFC)臭氧破坏系数“0”。
采用不锈钢制热交换器，提高耐腐蚀性 (IDFB4E～37E)
系列/CAD 出口空气流量 L/min (ANR) 入口空气流量 L/min (ANR)
ID 80～780 100～975
Use a pressure gauge below 50°C.
The Max. operating temperature of the
standard accessory Pressure gauge is
50°C. If temperature of the air tank
exceeds 50°C, provide a heat radiator
i.e. pipe siphon, etc.) between the tank
and the pressure gauge.
Please keep the Class 2 Pressure
Vessel Certificate in a safe place.
The AT series is in compliance with the
regulations in Japan (Class 2 Pressure
Vessel). The Class 2 Pressure Vessel
Certificate will be sent in 2 to 4 weeks
after the product is shipped. Please
keep it in a safe place.
特长能提供-30℃以下的低露点干燥空气。
没有加热器、电气控制盘。小型，量轻。
采用指示器，能确认出口露点状态。(自己再生式，容易维护
1）在进气口前使用SMC 油雾分离器（AM 系列）。因为压缩空气中
的油雾和外部尘粒会降低吸附效率和使用寿命。
2）当显示器颜色改变时，更换干燥剂。
Note 1) Manufactured upon receipt of order
Note 2) JISB2220 (JIS 10K FF flange)
Note 3) The accessories should be mounted by user.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!