SMC压头气缸，CDQSB20-10D[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SMC压头气缸，CDQSB20-10D
产品型号: -
产品展商: SMC
简单介绍
SMC压头气缸，CDQSB20-10D 系列/CAD 接管口径使用压力使用温度 (℃ ) FGF Rc2,4B法兰, 6B法兰 0.5MPa MAX.80 特长高温・高粘度液体的过滤。大流量的过滤(MAX.2000L/min) 捕捉异物的处理简单。

SMC压头气缸，CDQSB20-10D的详细介绍

SMC压头气缸，CDQSB20-10D
Nominal filtration accuracy: 5 to 105 μm
High filtration accuracy with stainless steel micromesh
Pleated type provides three times more
filtration area than a cylinder.
Easy element cleaning and regeneration
Material: Stainless steel 304 (EM100, EM200)
Stainless steel 316 (EM500, EM600)T
o extract the element from the case, rotate
the case counterclockwise about 20
degrees until it stops, then lower it by
about 40 mm and remove it from the cover.
c Align the indentations of the case with the
projections of the cover, lift the case upward
by about 10 mm and rotate it clockwise
vMount it in such a way that the entire flanged
perimeter of the cover and case are
Absolute filtration accuracy: 2 to 13 μm
US FDA compatible
Nonwoven fabric element with high filtration accuracy
of more than 99% removal and without fiber outflow
and release of chemical components
Material: P.P. (EJ102S ... x 0)
held by the retainer of the V-band.
bSet the stopper on the retainer while holding
down the V-band outside perimeter,
and then tighten the wing bolt to the prescribed
n Tighten the drain plug.
mWhen air release is completed, tighten the
Note) When two l250 elements are used,
do not discard the intermediate holder
and lower element holder attached under
the element, since they are reused.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!