主营产品:阀门、气动元件、仪器仪表、电子元器件
产品[

SMC平行开闭气爪/MHZ2-40D2-M9BWL[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以
产品名称: SMC平行开闭气爪/MHZ2-40D2-M9BWL
产品型号: MHZ2-40D2-M9BWL
产品展商: SMC
简单介绍
SMC平行开闭气爪/MHZ2-40D2-M9BWL 特长 采用直线导轨,高刚性、高精度。 防尘、防滴构造。 可选择防尘罩材质。

SMC平行开闭气爪/MHZ2-40D2-M9BWL的详细介绍

SMC平行开闭气爪/MHZ2-40D2-M9BWL


公司网址:www.drb168.net
直线导轨平行移动型气爪   MHZ□2
类型 系列/CAD 缸径(mm)
小型 MHZA2-6  6
小型·带防尘罩 MHZAJ2-6  6
标准 MHZ2  6,10,16,20,25,32,40
长行程 MHZL2  10,16,20,25
带防尘罩 MHZJ2  6,10,16,20,25
特长 采用直线导轨,高刚性、高精度。
防尘、防滴构造。
可选择防尘罩材质。

要设置自动开关,将自动切换到从下图所示的方向夹持器的自动开关的安装槽。设定位置后,拧紧连接磁性开关安装螺钉用平头钟表螺丝刀。
To set the auto switch, insert the auto switch into the auto switch installation groove of the gripper from the direction indicated in the following drawing. After setting the position, tighten the attached auto switch mounting screw with a flat head watchmaker’s screwdriver.

适用机型:
在系列MHZ2的侧方槽
在系列MHZL2的侧方槽
(1)设置自动开关,插入自动切换到气缸的安装槽,如下所示,并大致设置它。
(2)将自动切换到自动开关支架安装槽。
(3)确认检测位置后,拧紧连接到自动开关的固定螺丝(M2.5),并设置它。
(4)一定要改变在(2)的状态检测位置
Applicable models:
Square groove on the side of Series MHZ2
Square groove on the side of Series MHZL2
(1) To set the auto switch, insert the auto switch into the installation groove of the cylinder as shown below and set it roughly.
(2) Insert the auto switch into the auto switch bracket installation groove.
(3) After confirming the detecting position, tighten the set screws (M2.5) attached to the auto switch and set it.
(4) Be sure to change the detecting position in the state of (2).

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!


上海乾拓贸易有限公司    地址:上海嘉定嘉涌路99弄6号713    邮编:
联系人:单先生    电话:021-69000975   手机号码:18918574312    传真:021-39947181
沪ICP备09006758号-2  
 

沪公网安备 31011402005013号

点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息