SMC薄型液压缸，CHKGB40-15
符合JIS标准薄型液压缸 CHK□/CHDK□
系列/CAD 公称压力 (MPa) 缸体材质 动作方式 缸径(mm)
CHKD 10 铝 单杆双作用 20,25,32,40,50,63,80,100
CHKG 16 铝 单杆双作用 20,25,32,40,50,63,80,100
特长 铝质缸体，轻、紧凑。
可安装磁性开关。
带或不带磁性开关，缸体长度方向尺寸一样。
符合JIS标准 (CHKD系列)
带磁性开关 (CHDK系列：CHDKD、CHDKG)
1 。使用内六角螺钉（ JISB1176 ，气缸安装强度等级10.9或更高版本） 。
2 。因为一个横向负荷（偏心载荷）不能应用活塞杆，在建立装配架该侧向载荷将不会被应用到这样一种方式活塞杆。
3 。确保该杆的联锁长度端螺纹（男或女螺纹）和安装材料是至少80％的螺纹直径。
4 。当操作一个气缸的**次时，一定释放空气气缸和配管的内部。
当空气释放完毕，操作筒在减压下，再逐渐增加它到正常工作压力。
5 。自系列CH 2 KDB不具有空气释放塞，来自其他组件释放空气（例如，从管道等）为好。
6 。不要使用两个汽缸面对彼此水平或垂直于这样一种方式，其活塞棒打击对方。
7 。当在气缸盖侧包含液压流体或者是在通常的加压条件下，所施加的负载绝不允许罢工的活塞杆端。避免这样的应用程序。
8 。当带安装固定在气缸体螺栓，拧紧使用表中扭矩在左边的引导。
1. Use hexagon socket head cap screws (JISB1176,
strength class 10.9 or higher) for cylinder mounting.
2. Since a lateral load (eccentric load) cannot be applied
to the piston rod, build the mounting jig in
such a way that a lateral load will not be applied to
the piston rod.
3. Make sure that the interlocking length of the rod
end thread (male or female thread) and the mounting
material is at least 80% of the thread diameter.
4. When operating a cylinder for the first time, be sure
to release the air inside the cylinder and the piping.
When the air release is complete, operate the cylinder
at reduced pressure, then gradually increase it
to the normal operating pressure.
5. Since Series CHKDB does not have an air release
plug, release air from other components (e.g. from
piping, etc.) as well.
6. Do not use two cylinders facing one another horizontally
or vertically in such a way that their piston
rods strike each other.
7. When the cylinder head side contains hydraulic fluid
or is in a normally pressurized condition, the applied
load must not be allowed to strike the piston
rod end. Avoid such applications.
8. When mounting the cylinder body with mounting
bolts, use tightening torques in the table at left as a guide.
