WBIS8314A300，美国ASCO电磁阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: WBIS8314A300，美国ASCO电磁阀
产品型号: WBIS8314A300
产品展商: ASCO
简单介绍
WBIS8314A300，美国ASCO电磁阀 LCP Intrinsically Safe solenoid enclosure isdesignatedby the prefix “WBIS”. The Epoxy DinConnector is ordered by prefix “ISSC”.Example: WBIS8314A300 Spare Coil P/Ns

WBIS8314A300，美国ASCO电磁阀的详细介绍

WBIS8314A300，美国ASCO电磁阀

Nominal Wattage is 0.35 @ 24 VDC is, therefore, an acceptable medium for these valves.
Maximum Allowable "Off" State Current to the Valves must be less than 1 mA.
Electronically Enhanced "IS" Solenoid:
Maximum Capacitor Charge Time — 1 second
Minimum Time between Cycles — 1 second
Minimum Drop Current to Reset Electronic Coil — 2 mA
Nominal Temperature Rise at 24 VDC and 300 Ohms — 2°C (36°F)
Maximum Recommended Wire Run (#18 Wire) — 1.5 miles from barrier to valve
Important: Minimum series resistance of 200 ohms required in wiring
circuit if a safety barrier is not used for non-"IS" system.
The LCP Intrinsically Safe solenoid enclosure is
designatedby the prefix “WBIS”. The Epoxy Din
Connector is ordered by prefix “ISSC”.
Example: WBIS8314A300 Spare Coil P/Ns
Nominal Wattage is 0.35 @ 24 VDC is, therefore, an acceptable medium for these valves.
Maximum Allowable "Off" State Current to the Valves must be less than 1 mA.
Electronically Enhanced "IS" Solenoid:
Maximum Capacitor Charge Time — 1 second
Minimum Time between Cycles — 1 second
Minimum Drop Current to Reset Electronic Coil — 2 mA
Nominal Temperature Rise at 24 VDC and 300 Ohms — 2°C (36°F)
Maximum Recommended Wire Run (#18 Wire) — 1.5 miles from barrier to valve
Important: Minimum series resistance of 200 ohms required in wiring
circuit if a safety barrier is not used for non-"IS" system.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!