ASCO长寿命系列电磁阀
Differential pressure (PS) 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range -40/-20 to +85°C (TPE/CR)
closing to provide reliable and economical operation
The high fl ow, angle type bodies in combination with the special main
diaphragm assemblies give the unique operating features required for dust
Integral compression fi ttings for fast, easy, secure installation
Valves can be supplied according to ATEX Directive 94/9/EC for
non-electrical equipment by using suffi x GD
The components satisfy all relevant EC directives
ASCO? 引进了一种独特的直接安装式8320滴控阀。
这种电磁阀是罐装设备和双向流量控制应用装置中的关键元件。
这种阀可接受电脉冲信号从而达到预置的控制位 。这种阀是为先导应用设计的，
利用微控功能来控制执行器双向作用和阀的运作。这种直动特性和可达
0.19的Cv值可以达到**的控制, 特别是当他连接
上一个ASCO Sentry阀位指示器时，例如：L-YCB1C
The valves can be mounted in any position without affecting operation.
Pipe connection identifi er is: G= combination thread according to ISO 228/1 and ISO 7/1 or Ø for Quick
For Quick Mount types tightness is achieved by the O-ring sealing on the pipes (3/4"=Ø26,4 to 27,4 and
and 1 1/2"=Ø47,8 to 48,8) according to ISO 4200.
When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve
mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have
the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions.
Ø 6 mm O.D. is recommended for all installations.
Other pipe threads are available on request.
Installation/maintenance instructions are included with each valve.
Spare parts kit and replacement coils are available.
