TURCK对射式开关，德国图尔克光电传感器，EO2M-Q10-6X
2米PVC导线
防护等级IP67
LED灯全角度可见
工作电压:10…30 VDC
功能原理
对射式传感器包含一个发射器和一个接收器。
它们对应安装以确保光线从发射端直接接发射到接收端。当光线被目标物中断或减弱事，传感器输出信号。对于检测不透明物体对射式传感器是可靠的。此种检测模式的形成鲜明对比的亮态、暗态工作模式和很高的过量增益，使此种检测模式拥有更大的检测距离和困难环境适应能力。
工作模式 对射式传感器（发射器）
发光模式 红
波长 640nm
检测范围 [mm] 0…2000 mm
环境温度 -20…+55 °C
工作电压 10…30VDC
漏波纹 < 10 % Uss
短路保护 是
反极性保护 是
正常延迟 ≤120 ms
设计 方型, Q12
尺寸 12.4x 8x 26.6 mm
外壳材料 塑料, 人造橡胶, 黄
镜头 塑料, 聚碳酸酯
连接 电缆, PVC
线缆长度 2m
线缆横截面 2 x 0.34mm2
防护等级 IP67
工作电压指示 LED指示灯 绿
过量增益指示 LED指示灯 黄
TURCK对射式开关，德国图尔克光电传感器，EO2M-Q10-6X
Cable, PVC, 2 m
Protection class IP67
LED all-round visible
Operating voltage: 10…30 VDC
Functional principle
Opposed mode sensors consist of an emitter and receiver.
They are installed opposite each other so that the light from the emitter is aimed directly at the receiver. When an object interrupts or weakens the light beam, the sensor switches. Opposed mode sensors are the most reliable photoelectric sensors for detection of opaque targets. An excellent contrast between light and dark conditions and an extremly high excess gain are typical of this sensing mode, thus allowing operation over larger distances and under difficult conditions.
Operating mode opposed mode sensor (emitter)
Light type red
Wavelength 640 nm
Range 0…2000 mm
Ambient temperature -20…+55 °C
Operating voltage 10…30VDC
Residual ripple < 10 % Uss
Short-circuit protection yes
Reverse polarity protection yes
Readiness delay ≤ 120 ms
Design rectangular, Q12
Dimensions 12.4 x 8 x 26.6 mm
Housing material plastic, Elastomere, yellow
Lens plastic, polycarbonate
Connection cable, PVC
Cable length 2 m
Cable cross section 2 x 0.34 mm²
Protection class IP67
Power-on indication LED green
Excess gain indication LED yellow
