如果您对该产品感兴趣的话,可以
产品名称:
FESTO气源处理单元,费斯托气源处理单元
产品型号:
-
产品展商:
德国FESTO费斯托
简单介绍
FESTO气源处理单元,费斯托气源处理单元
h the ISO 1179-1 standard and the ISO 228-1 standard.
Ambient conditions
Nominal size 45 70 95 140 200 300
Ambient temperature [°C] –0 … +60
FESTO气源处理单元,费斯托气源处理单元的详细介绍
FESTO气源处理单元,费斯托气源处理单元
Energy-saving function and error reporting with VADMI-…-LS-P/N
The further development of the vacuum switch
In addition to the described functions,
1 External controller F activates the pressure sensor
Pressure sensor A checks the vacuum status
No vacuum present
2 Pressure sensor activates the VG solenoid B
Valve for compressed air supply is opened
Vacuum generation E is activated
3 Vacuum level 150 mbar below the maximum level is exceeded
Pressure sensor sends an enable signal to external controller (PLC) F
Transport process can start
4 The specified maximum level is achieved
Pressure sensor A switches the VG solenoid off
Compressed air supply stopped
Vacuum generation E interrupted
Non-return valve D prevents the vacuum level from being purged
5 Leakage causes the vacuum level to drop to the minimum value
Pressure sensor A switches the VG solenoid on again
Vacuum generation E is active again
Fault: Transport stopped
6 Major leakage causes an overly large drop in the vacuum level
Vacuum generator E cannot compensate for the drop in level
7 Vacuum level is 150 mbar below the minimum value
External controller interrupts the transport process
Vacuum generation E is ended
Cycle ended: Vacuum off
8 Transport process ended
External controller (PLC) F deactivates VG solenoid
Vacuum generation E is ended
External controller F switches on ejector RP solenoid C WH
Ejector pulse activated
