产品[
威格士比例阀，DG4V-5-6CJ-M-U-H6-20[产品打印页面]
]资料
产品名称:
威格士比例阀，DG4V-5-6CJ-M-U-H6-20
产品型号:
-
产品展商:
威格士VICKERS
简单介绍
威格士比例阀，DG4V-5-6CJ-M-U-H6-20
需要10千瓦在70巴（1000磅）。盖端泵用
18立方厘米，位移，需要4千瓦在70巴
（1000磅）。与同时装载两个墨盒，双联叶片泵会
需要的输入功率为14千瓦。
2，由于电机泵达到满负荷，电机
的转速不等率将增加约2％，减少图表值输出流量。
威格士比例阀，DG4V-5-6CJ-M-U-H6-20的详细介绍
威格士比例阀，DG4V-5-6CJ-M-U-H6-20
[ in3/rev] 流量 @额定转速 RPM l/min (gpm) 额定转速
rpm 额定压力 bar [psi] 重量
420 系列泵, 套件 9900194-008 垫片更换程序和安装资料
壳体压力 - 无外部泄油管路 - 20 bar [300psi], 用于连续工况
背压超过 20 bar [300psi] 时, 需使用外
部泄油管路. 安装泄油管路, 保证马达壳体内部在工作时充满油液.
2000 系列盘配流马达, 内带交叉超载溢流阀 技术手册 English C-MOLO-TM001-E
A, H, R S, T, W, 2K, 4K, 6K, 10K 工具清单, 扭矩发生器, 3
, 4, 6, & 12 系列转向控制单元 (转向控制单元),
110, 230 & 450 系列转向控制单元, 20 25, 35 & 40 系列转向控制单元
Char-Lynn 马达驱动输入轴辨认, 尺寸和对照参考 服务报告 English 1100
产品更新: 可以在伊顿售后服务零件市场通过替换带
有伊顿和威格士品牌的重新的零件, 对在产品更新程序内的产品完成更新.
NOTE: To find the shaft power to drive a single piston pu
mp or vane pump at 1800 rpm, select the required displacement and operating
pressure, then read across the chart for the kilowatt power input.
To determine the total input power for thru-drive pumps, add the
kilowatts for the front pump and the rear pump together, at the selected
operating pressures. The input kilowatts should not exceed 16 k
W with only one pumping unit in operation, or with two pumping units in
For example: A thru-drive pump with a displacement of 20
cm3/rev will require 8 kW of power at 100 bar (1500 psi).
The second pump with a displacement of 18 cm3/rev
will require 7 kW of power at 100 bar (1500 psi).
With both pumping units operating simultaneously, they require 15 kW of input power.
1. As operating pressure reduces to minimum, flow incr
eases from chart values by approximately 4 to 5% for piston pumps
and 10 to 12% for vane pumps.
2. As the motor pump reaches full load, the motor speed
droop will reduce output flow from chart values by approximately 2%.
