SY513-5GD-01,日本SMC两位三通电磁阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SY513-5GD-01,日本SMC两位三通电磁阀
产品型号: SY513-5GD-01
产品展商: SMC
简单介绍
SY513-5GD-01,日本SMC两位三通电磁阀 . The maximum dimension L2 is, as a rule, twice the thread (Example) for M4: L2 max. = 8 mm . A parallel key is used on the long shaft for size 40.

SY513-5GD-01,日本SMC两位三通电磁阀的详细介绍

SY513-5GD-01,日本SMC两位三通电磁阀
3。长度（尺寸S）为25.5时，下列任何
直接出线式自动开关的使用：D-R73/R80/S79/S7P/T79
长度（尺寸S）为34.5时，下列任一
连接器类型自动开关的使用：D-R73/R80/T79
1。长度为24时，下列任一自动开
(Example) for M3: L1 max. = 6 mm
A parallel key is used on the long shaft for size 40.
Applicable shaft type: W
(If altering the standard chamfer and shortening the shaft are not required,
indicate “.” for both the L2 and Y dimensions.)
. Since L2 is a standard chamfer, dimension E2 is 0.5 mm or more, and 1 mm
or more with shaft bore sizes of ┆30 or ┆40.
. Applicable shaft type: W
Symbol: A15 Applicable to single vane type only
关的使用：D-90/90A/S99（V）/ T99（V）/ S9P（V）
当下列任何磁性开关的使用长度为30：D-97/93A
2。的角度为60°时，下列任何磁性开关的使用：D-90/90A/97/93A
的角度为69°时，以下任一自动
开关的使用：D-S99（V）/ T99（V）/ S9P（V）
If altering the standard chamfer and shortening the shaft are not required,
indicate “.” for both the L1 and X dimensions.)
Since L1 is a standard chamfer, dimension E1 is 0.5 mm or more.
Applicable shaft type: W
Symbol: A14 Applicable to single vane type only
A special end is machined onto the long shaft, and a through-hole is drilled into it.
Female threads are machined into the through-hole, whose diameter is equivalent
to the pilot hole diameter.
Not available for size 10.
The maximum dimension L1 is, as a rule, twice the thread size.
A special end is machined onto the short shaft, and a through-hole is drilled into
Female threads are machined into the through-hole, whose diameter is equivalent
to the pilot hole diameter.
. Not available for size 10.
. Applicable shaft type: W

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!