DG5V-10-W-3C-M-W-H-10,VICKERS液压阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: DG5V-10-W-3C-M-W-H-10,VICKERS液压阀
产品型号: DG5V-10-W-3C-M-W-H-10
产品展商: VICKERS
简单介绍
DG5V-10-W-3C-M-W-H-10,VICKERS液压阀 2,2公斤3公斤5,5公斤（4.85磅）（6.61磅）（12.13磅）保护IEC364-4-41或HD384.04.41 （KDE的0100，第410部分）变压器VDE0551/EN60742/IEC742 温度范围：-20 C至+60 C（-4°F到+140？F）安装可选的态度...

DG5V-10-W-3C-M-W-H-10,VICKERS液压阀的详细介绍

DG5V-10-W-3C-M-W-H-10,VICKERS液压阀
螺钉安装扭矩12〜14牛顿米（108
阀安装面需要32微英寸
精度达到0.025（0.001）完成持平。
氟橡胶口O型圈提供。 SM4-10 O型圈
（AS568-010）：1.78（0.70）截面和
6,07（0.239）内径。 SM4-12和
Proper fluid condition is essential for
long and satisfactory life of hydraulic
components and systems. Hydraulic
fluid must have the correct balance of
cleanliness, materials, and additives for
protection against wear of components,
elevated viscosity and inclusion of air.
Essential information on the correct
methods for treating hydraulic fluid is
included in Vickers publication 561
“Vickers Guide to Systemic
Recommended cleanliness levels, using
petroleum oil under common conditions,
are based on the highest fluid pressure
levels in the system and are coded in
the chart below. Fluids other than
petroleum, severe service cycles, or
temperature extremes are cause for
adjustment of these cleanliness codes.
See Vickers publication 561 for exact
however, that life of any hydraulic
component is shortened in fluids with
higher cleanliness codes than those
listed below. These codes have been
proven to provide a long, trouble-free
service life for the products shown,
regardless of the manufacturer.
Vickers will extend, by one year, the
standard warranty on all Vickers
products used in a system protected
SM4-15 O型圈（AS568-013）：1.78（0.70）
横截面和10,82（0.426）内
直径。更换O形圈提供
密封套件920318（SM4-10），915850（SM4-12），
和920319（SM4-15）只。Description Model Code
Servovalve SM4-10/12/15 0,68 (1.5)
Mounting subplate SM4M(E)-10/12/15-10(M) 0,73 (1.6)
SM4A-3-10/12/15-10(M) 0,240 (0.53)
SM4A-5-15-10(M) 0,499 (1.10)
Flushing valve SM4FV-10/12/15-10 0,15 (0.32)1/2” BK855992
Subplate mounting bolt kit (metric) M6 x 40mm BK855993M
Valve mounting bolt kit (inch) 1/4–20 x 21/4” BK866685
Valve mounting bolt kit (metric) M6 x 60mm BK689623M
See application brochure 656 for the
complete Vickers line of amplifiers,

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!