产品[
DSG-01-3C4-A220-5,销售油研先导式溢流阀[产品打印页面]
]资料
产品名称:
DSG-01-3C4-A220-5,销售油研先导式溢流阀
产品型号:
DSG-01-3C4-A220-5
产品展商:
YUKEN
简单介绍
DSG-01-3C4-A220-5,销售油研先导式溢流阀
as lo-noise types. Able to protect pumps and control valves
against excessive pressures, they are used to control the pressure
in the hydraulic system to a constant level. Remote control and
unloading are permitted by using vent circuitsI
DSG-01-3C4-A220-5,销售油研先导式溢流阀
DSG-01-3C4-A220-5,销售油研先导式溢流阀的详细介绍
DSG-01-3C4-A220-5,销售油研先导式溢流阀
使用流体相当于ISO VG 32或VG 46。
使用磷酸酯或聚醇酯液体。当使用磷酸酯流体
因为特殊的密封件都需要m个Odel等号码被使用。
调整压力，松开锁紧螺母，转动手柄较高的压力或逆时针缓缓顺时针
粘度为15间 - 400毫米2 /秒
使用满足以上给出的建议粘度和油温的液压油。
Pilot operated relief valves here have been particularly develop-ed
DSG-01-3C4-A220-5,销售油研先导式溢流阀
line is too large, chattering is likely to occur.
Thus, as far as possible reduce the inside Dia. and the length of the pipe.
Pressure is limited by collars fitted.
If a working pressure cannot be attained,
remove some collars. One collar is
equivalent to 10 MPa (1450 PSI).
With a small flow, the setting pressure
对于更低的压力。调整后，不要忘了锁紧螺母拧紧。
油箱管路的管道不应该被连接到其它的阀的任何油箱线路，而是直接连接到油箱
任何类型的在下面的表中列出的液压油都可以使用。
DSG-01-3C4-A220-5,销售油研先导式溢流阀
