图尔克线性位移传感器,DBI5U-M18E-AP4X3[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 图尔克线性位移传感器,DBI5U-M18E-AP4X3
产品型号: DBI5U-M18E-AP4X3
产品展商: TURCK
简单介绍
图尔克线性位移传感器,DBI5U-M18E-AP4X3 安装说明用于安装在DIN导轨电气连接接线端子 IEC C1类; C2 ; C3 ; D1的额定电流In （ ≤ ≤ 1 ns的保护类型防爆保险业监督IIC T4 ... T6 ;前20 IAD

图尔克线性位移传感器,DBI5U-M18E-AP4X3的详细介绍

图尔克线性位移传感器,DBI5U-M18E-AP4X3
Operating voltage 19…29 VDC Input resistance (voltage) 1000 kΩ
Output circuits 0/4…20 mA / 0…10 V Load resistance current
Protection class IP20 Power consumption ≤ 0.32 W
输入标称电压Un额定电流In （ ≤ 40 ℃）标称放电电流In
（ 8/20 ）微秒（芯芯）总浪涌电流（ 8/20 ）微秒
IMSP -2X2 - 24 24 VDC 350毫安5 kA的20 kA的234
IMSP -2-12 12 VDC 500毫安350 A 20 kA的236
IMSP - 2 - 24 24 VDC 500毫安250 A 10 kA的238
防护等级IP20环境温度-40 ... +80℃
Ambient temperature -20…+60 °C Mounting instruction For mounting on DIN
Electrical connection screw terminals Operating concept DIP switch
电涌保护器 - 1通道 - 6.2毫米
防护等级IP20环境温度-40 ... +80℃
The IMB system from TURCK is an easyto-
install I/O solution for the cabinet. It
offers a high packing density which cannot
be achieved with DIN rail interfaces.
The 175 x 210 mm IMB backplane can
host up to eight interface cards, resulting
in 32 digital or 16 analog I/Os per backplane.
The interface cards are connected
to the PLC via assigned slots on the backplane
and a standard network connection.
All cards are hot-swappable and can
be plugged and unplugged during operation.
Power can be supplied redundantly;
decoupling takes place on the IMB
cards.
The backplane accommodates the entire
connection level; galvanic as well as Ex
separation of the I/O channels is
achieved simply by plugging the interface
cards in the corresponding slots.
This helps you to cut down engineering
efforts for the entire interface level in the
event of maintenance and future extension
of the system. HART?transmissible
analog cards and DTM parametrizable
temperature measuring amplifiers simplify
parametrization and enhance the
operating comfort.
安装说明用于安装在DIN导轨电气连接接线端子
标称电压Un 24 VDC IEC C1类; C2 ; C3 ; D1
≤ 1 ns的保护类型防爆保险业监督IIC T4 ... T6 ;前20 IAD
防护等级IP20环境温度-40 ... +80℃
安装说明用于安装在DIN导轨电气连接接线端子
IEC C1类; C2 ; C3 ; D1标称放电浪涌
电流In （ 8/20 ）微秒（ coreground ）
≤ 1 ns的保护类型防爆保险业监督IIC T4 ... T6 ;前20 IAD
T85 °C ... T135 °C
类型和数据 - 选择表
输入标称电压Un标称放电电流In （ 8/20 ）微秒（芯芯）
IMSP - 4 - 24 24 VDC 250一240
IMSP -4-12 12 VDC 350 242

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!