TURCK磁感应开关，德国图尔克气缸传感器，BIM-IKT-AP6X-H1141
方型外壳，厚度28 mm
金属，GD-Zn
磁感应传感器
3线直流, 10…30 VDC
常开，pnp输出
M12 x 1接插
功能原理
磁感应传感器可以感应磁场，特别适合气缸内活塞的位置检测。 基于磁场能够穿透非铁磁性金属的特性，传感器能够检测铝制气缸内附于活塞上的永磁体的位置。
通过速度≤ 10 m/s
重复性≥ ± 0.1 mm
温度漂移≤ 0.1 mm
磁滞≤ 1 mm
环境温度-25…+70 °C
工作电压10…30VDC
余波≤ 10 % Uss
直流额定工作电流≤ 200 mA
空载电流 I0 ≤ 15 mA
漏电流≤ 0.1 mA
额定绝缘电压≤ 0.5 kV
短路保护是/ 循环
压降在 Ie ≤ 1.8 V
断路/反极性保护是/ 是
输出性能3线, 常开触点, PNP
开关频率1 kHz
设计方型, IKT
尺寸30 x 14.6 x 28 mm
外壳材料金属, GD-Zn
感应面材料塑料, PA
连接接插件, M12 x 1
防震动性55 Hz (1 mm)
防冲击性30 g (11 ms)
防护等级IP67
开关状态指示LED指示灯 黄
TURCK磁感应开关，德国图尔克气缸传感器，BIM-IKT-AP6X-H1141
Rectangular, height 28 mm
Metal, GD-Zn
Magnetic-inductive sensor
DC 3-wire, 10…30 VDC
NO contact, PNP output
Male connector, M12 x 1
Functional principle
Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders.
Based on the fact that magnetic fields can permeate non-magnetizable metals, it is possible to detect a permanent magnet attached to the piston through the aluminium wall of the cylinder.
Pass speed ≤ 10 m/s
Repeatability ≥ ± 0.1 mm
Temperature drift ≤ 0.1 mm
Hysteresis ≤ 1 mm
Ambient temperature -25…+70 °C
Operating voltage 10…30VDC
Residual ripple ≤ 10 % Uss
DC rated operational current ≤ 200 mA
No-load current I0 ≤ 15 mA
Residual current ≤ 0.1 mA
Rated insulation voltage ≤ 0.5 kV
Short-circuit protection yes/ cyclic
Voltage drop at Ie ≤ 1.8 V
Wire breakage / Reverse polarity protection yes/ complete
Output function 3-wire, NO contact, PNP
Switching frequency 1 kHz
Construction rectangular, IKT
Dimensions 30 x 14.6 x 28 mm
Housing material metal, GD-Zn
Material active area plastic, PA
Connection male, M12 x 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
Switching state LED yellow
The product portfolio
Whether applied in machine and plant construction, in the sectors of automotive,transport and handling, food and beverage or in the chemical or pharmaceutical industry, TURCK automation solutions and products increase the availability and efficiency of your systems. But this is not all! Through efficient standardization you also lower your costs for purchase, storage, installation and operational safety. We provide you with optimal solutions for your automation lines. This is possible thanks to the industry-specific knowledge we have acquired in close co- operation with our customers and through electronics development and production on the highest level.
The product data base
Whether software tools for programming,configuration or commissioning support, our data sheets or CAD data are available in 80 export formats.
Our website helps you to find products and solutions fast, seven days a week, at any place worldwide and in nine different languages. You have access to nearly all products and solutions– clearly structured, completely documented and free for download.
TURCK磁感应开关，德国图尔克气缸传感器，BIM-IKT-AP6X-H1141
