DGMDC-5-X-TK-30/VICKERS多路阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: DGMDC-5-X-TK-30/VICKERS多路阀
产品型号: DGMDC-5-X-TK-30
产品展商: VICKERS
简单介绍
DGMDC-5-X-TK-30/VICKERS多路阀 Pump sizing is important to assure adequate power for under all operating conditions. The required pump flow can calculated by the following equation.

DGMDC-5-X-TK-30/VICKERS多路阀的详细介绍

DGMDC-5-X-TK-30/VICKERS多路阀
Force required for the axle.
Kingpin torque as determined in Step 1.
The value calculated in Step 1 is the total torque for the
axle. If the steered axle is power driven, double this value
to approximate the additional dynamic loads.
Effective radius arm about the kingpin axis at which
the cylinder force is applied. The effective radius is the
minimum distance from kingpin to the axis of the cylinder
… not the actual length of the arm.
The 13-tooth gears, versus 10 teeth in previous pumps,
minimizes the flow ripple. This reduces noise as well as
The improved trap reliefs not only increase power, they also
For vehicle with a steered axle that can never be overloaded
use 80% of the steering circuit relief valve setting. For manually
set area is determined, the cylinder diameter can be calculated.
D = Inside diameter of cylinder.
d = Rod diameter as required.
The cylinder stroke is determined by axle geometry. That is, the
required stroke is a function of the radius arm and the total angle
through which the arm turns.
help keep oil flowing smoothly to reduce noise.
Improved bearing lubrication system uses inlet oil instead
high pressure oil, improving volumetric efficiency for more
The super polished shaft and gears improve mechanical
efficiency and reduce wear on these components, adding
the service life and reliability of the pump.
The optimized trapped oil relief areas help reduce pressure
ripple for quieter operation. This also decreases the input
The innovative new wear plate permits simple field
reversibility of the pump direction. Simply open the pump,
switch the drive gear and idler gear, reposition the plug and
reassemble. No extra parts are needed.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!