SY7120-5DZ-02-F2/SMC电磁阀资料[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SY7120-5DZ-02-F2/SMC电磁阀资料
产品型号: SY7120-5DZ-02-F2
产品展商: SMC
简单介绍
SY7120-5DZ-02-F2/SMC电磁阀资料 3. Install piping after confirming IN and OUT. Be sure that chips from the pipe threads and sealing material do not get inside the piping.

SY7120-5DZ-02-F2/SMC电磁阀资料的详细介绍

SY7120-5DZ-02-F2/SMC电磁阀资料
1. Design circuits so that back pressure or back flow
will not occur. If back pressure occurs, it may
1. When selecting a model, a model that does not
specification ranges after due consideration of the
purpose of use, specification requirements, and
operating conditions (fluid, pressure, flow rate,
temperature, environment).
2. Do not use at temperatures at or above the boiling
3. Never use with gases, including air.
4. Do not use in locations where peak pressure rises
to 1 MPa or more due to water hammer, surge
1. Use a quick change filter for filtration of water,
alkali and cleaning fluids, etc.
2. There may be circumstances where a seal or an Oring
ridges exposed at the end of male threads.
Flush the piping lines at the time of initial use and when
1) Replace the element after removing the liquid from the
piping and confirming that pressure inside the filter is zero
1. Install and connect piping ensuring space
necessary for maintenance work and inspections.
2. Before piping is connected, air blow (flush) or
wash it thoroughly to remove chips, cutting oil and
other impurities from inside the piping.
Further more, conduct replacement using an IN, OUT
differential pressure of 0.1 MPa as a guide.
2) Start replacement after confirming that the temperature of
the filter body is within a range of 0 to 40°C.
3) When setting the element, be sure that it does not tilt

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!