52000388/ASCO红帽电磁阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 52000388/ASCO红帽电磁阀
产品型号: 52000388
产品展商: ASCO
简单介绍
52000388/ASCO红帽电磁阀 Press key B to reset the alarm. MANUAL ACTIVATION OF EVERY SINGLE OUTPUT From the keyboard you can manually and individually activate every single output for an operation test.

52000388/ASCO红帽电磁阀的详细介绍

52000388/ASCO红帽电磁阀
口径范围： DN40-400（1.5”-16”）
压力等级： PN1.6、4.0、6.3Mpa（ANSI 150、300、600LB）
泄漏等级： ASME B16.104 Ⅴ（标准型金属阀座）
ASME B16.104 Ⅵ（切断型软阀座）
阀座直径(dn) 20 25 32 40 50 65 80 100 125 150 200 250 300
额定流量系数(KV) 直线 6.9 11 17.6 27.5 44 69 110 176 275 440 630 875 1250
等百分 6.3 10 16 25 40 63 100 160 250 360 570 850 1180
SET PAUSE TIME BETWEEN TWO ACTIVATIONS FROM 1 TO 999 SEC.
If the pulse time is lower than 1 sec. it is possible to
set any pause time value in the range indicated.
If the activation time is higher than 1 sec. the minimum settable pause time is:
Minumum pause time = 5 times pulse time (B2x)
SHORT CIRCUIT OUTPUT PROTECTION
In case of short circuit, the output is automatically skipped, r
elay K1 - normally active - is deactivated and the terminal board contact opens.
The display alternatively shows code E1 and the number of the faulty output.
INPUTS ENABLE FROM KEYBOARD
In Set up you can enable or disable the control o
f all the inputs of the device.
If inputs are disabled, they are considered as
always closed and no jumper is required on the terminal board.
允许压差(MPa) 3.2 3.0 2.0 1.8 1.5 1.4 1.0 0,7 0.6 0.5 0.3 0.2 0.1
公称压力(MPa) 1.6、2.5、4.0、6.4、10.0
额定行程(mm) 16 25 40 60 100
阀盖形式标准型(-17～+250℃)、
高温型(+250～+450℃)、低温型(-40～-196℃)、波纹管密封型(-40～+350℃)
压盖形式螺栓压紧式
密封填料 V型聚四氟乙烯填料、V型柔性石墨填料
阀芯形式单座柱塞型阀芯
流量特性直线性、等百分比

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!