DG5V-8H-2C-T-MU-C10[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: DG5V-8H-2C-T-MU-C10
产品型号: DG5V-8H-2C-T-MU-C10
产品展商: 威格士VICKERS
简单介绍
DG5V-8H-2C-T-MU-C10 15V. Do not exceed 30V command signalc. Decrease voltage: the LED should go off when the voltage is less than Switch off power supply and command/input signal and then

DG5V-8H-2C-T-MU-C10的详细介绍

DG5V-8H-2C-T-MU-C10
IEC 529: IP67 (when correctly installed
with interface seal in place)
Fully short-circuit and reverse-polarity
PA6 glass reinforced plastic
(conforms to UL-94HB). Color: gray
ISO 4400 (DIN 43650)
Ø 5 to 10 mm (0.197 to 0.394 dia)
0,5-1,0 mm2 (20-17 AWG)
–20 to +70C (–4 to +158F)
mounting it on the valve solenoid,
apply 24V DC (20 to 30V limits) to
the “power input” terminals.
Check for correct plug function by
illumination/non-illumination of the
a. Apply less than 2 to 3 volts to the
input terminal: the LED should not
b. Increase voltage: the LED should
illuminate when the voltage reaches
install plug on solenoid. Ensure that
all seals are fitted correctly and
clamped as the retaining screw is
tightened: this is essential in
providing IP67 protection.
Ensure that the hydraulic system will
not cause any erratic movement of
– Switch on power supply again.
– Repeat LED/function check as in 2.
An LED malfunction now indicates a
short circuit at the load.
Successful completion of these
checks means that the plug and load
are ready for use.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!