0811402401/REXROTH高频响方向阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 0811402401/REXROTH高频响方向阀
产品型号: 0811402401
产品展商: REXROTH
简单介绍
0811402401/REXROTH高频响方向阀 The temperature dependence of the tripping behavior of the circuit breakers has to be considered according to the manufacturer's specifications.

0811402401/REXROTH高频响方向阀的详细介绍

0811402401/REXROTH高频响方向阀
The specified surface temperature in AC voltage solenoids
is valid for the faultless operation. In case of failure (e. g.
blocking of the control spool), the surface temperature
may rise to above 180 °C. Considering the flash point (see
page 8), the system must therefore be checked for possible
As fuse protection, circuit breakers (see table on the
right) must be used unless the creation of an ignitable
atmosphere can be excluded in a different way. Thus, the
surface temperature can - in case of failure - be limited to
maximally 220 °C. The tripping current must lie within a
time interval of 0.6 s with 8 to 10 times the nominal power
consumption. (Tripping characteristics "K").
The necessary non-tripping current of the fuse must not fall
below the value I1 (see table page 16). The maximum
tripping current of the fuse must not exceed the value I2
Actuation of the manual override is only possible up to a
tank pressure of ca. 50 bar. Avoid damage to the bore for
the manual override! (Special tool for the operation, separate
order, Material no. R900024943). When the manual
override is blocked, the operation of the solenoid must be
Maximum switching frequency 1/h 15000 7200
Maximum coil temperature 4) °C 150 180
Protection class according to DIN EN 60529 I
P 65 (with mating connector mounted and locked)
2) Special voltages upon request
3) The switching times have been determined at a hydraulic
fluid temperature of 40 °C and 46 cSt. Deviating hydraulic
fluid temperatures can result in different switching times!
Switching times change depending on operating time and
application conditions.
4) Due to the temperatures occurring at the surfaces of the
solenoid coils, the standards ISO 13732-1 and EN 982
need to be adhered to!
Circuit breaker with tripping characteristic K according
to EN 60898-1 (VDE 0641-11), EN 60947-2 (VDE 0660-101),
IEC 60898 and IEC 60947-2:
In the electrical connection, the protective earthing
conductor (PE ) is to be connected properly.
0811402401/REXROTH高频响方向阀

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!