HT8345H3MO，经销JOUCOMATIC电磁阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: HT8345H3MO，经销JOUCOMATIC电磁阀
产品型号: HT8345H3MO
产品展商: ASCO
简单介绍
HT8345H3MO，经销JOUCOMATIC电磁阀 16 bar version ?1,9 mm on request. Solenoid operator with metal enclosure, IP65 protection. Solenoid head for dusty explosive atmospheres, zone 22 (see

HT8345H3MO，经销JOUCOMATIC电磁阀的详细介绍

HT8345H3MO，经销JOUCOMATIC电磁阀

Maximum Allowable "Off" State Current to the Valves must be less than 1 mA.
Electronically Enhanced "IS" Solenoid:
Maximum Capacitor Charge Time — 1 second
Minimum Time between Cycles — 1 second
？有在排气模式（飞行员和主）两个排气流量。试点
排气必须连接到主排气的空气或惰性气体罐时
不被排出到大气中。
？对于“快排”阀门，压力接口为1/16“，排气口为1/4”。
？重要信息：低工作压差必须保持
Internal parts : stainless steel and thermoplastic material

Sealing : nitrile (NBR) and polyurethane (PUR)
Electrical equipment complies with standard VDE 0580
Encapsulated coil and iron circuit, rotatable by 90°
Standard connector ISO 4400, rotatable by 90°
with simplified connections and direct front access (see overleaf)
Manual override: impulse-type
Subbases with instant fittings: glass-filled polyamide 6/6 (PA + FG)
Threaded subbases: die-cast zinc alloy and aluminium
压力和排气口之间。送风和排风管道必须充满
区域，不受限制。 ASCO流量控制和其他类似的组件必须

安装在只在气缸线。
？膜片和主盘FKM只（飞行员低温NBR）。
？低为零时，阀的选型垫片是在外部位置和适当的
辅助空气压力被施加。见图表146页的辅助
压力与主线的压力。小1 bar工作压差
当选择垫片是在内部位置。

Minimum Drop Current to Reset Electronic Coil — 2 mA
Nominal Temperature Rise at 24 VDC and 300 Ohms — 2°C (36°F)
Maximum Recommended Wire Run (#18 Wire) — 1.5 miles from barrier to valve
Important: Minimum series resistance of 200 ohms required in wiring
circuit if a safety barrier is not used for non-"IS" system.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!