SY5220-5LZD-01，热销SMC直动式电磁阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SY5220-5LZD-01，热销SMC直动式电磁阀
产品型号: SY5220-5LZD-01
产品展商: SMC
简单介绍
SY5220-5LZD-01，热销SMC直动式电磁阀 ∗ Guideline for tightening torque Number of turns when the fitting is screwed into the body with 2 to 3 windings of sealant tape applied to threaded

SY5220-5LZD-01，热销SMC直动式电磁阀的详细介绍

SY5220-5LZD-01，热销SMC直动式电磁阀

N.C./N.O. with same configuration/Double acting
Compatible with 100°C fluid temperature
Note 1) 0 to 60°C when the diaphragm is NBR or EPR.
Note 2) The N.O. type is not available for LVA10.
Note 3) Contact SMC if the valve will be used with vacuum and B → A flow.
1. Preparation before piping
系列/CAD 阀形式适合软管外径孔口直径 (mmφ)
(接头一体型/螺纹拧入型) LVH N.C. 1/8～1/2
(公制：φ3～φ12
英制：1/8～1/2) 4～12
特长阀体材质：New PFA/SUS/PPS

Before piping is connected, it should be thoroughly blown out
with air (flushing) or washed to remove chips, cutting oil and
other debris from inside the pipe.
列/CAD 阀形式适合软管外径孔口直径 (mmφ)
接头一体型 LVC N.C./N.O./双作用公制：3～25
英制：1/8～1 4～22
特长阀体材质：New PFA
同一形状的N.C./N.O./双作用。
适合的流体温度100℃。
Install piping so that it does not apply pulling, pressing, bending

or other forces on the valve body.
2. Use the tightening torques shown below when making
connections to the pilot port.
Operating port tightening torque
化学液用气控阀/螺纹拧入型 LVA
系列/CAD 阀形式适合软管外径孔口直径 (mmφ)
螺纹拧入型 LVA N.C./N.O./双作用 1/8～1 2～22
特长阀体材质：New PFA/SUS/PPS
膜片材质：可选择PTFE,EPR,NBR。
化学液用阀/手动型(接头一体型/螺纹拧入型) LVH

materials with fluids, using the check list on features
page 490. Contact SMC regarding fluids other than those in
Operate within the indicated fluid temperature range.
3. Maintenance space
Ensure the necessary space for maintenance and inspections.
4. Fluid pressure range
Keep the supplied fluid pressure within the operating pressure
range shown in the catalog.
5. Ambient environment

Operate within the ambient operating temperature range. After
confirming the compatibility of the product's component materials
with the ambient environment, operate so that fluid does
Provide a relief valve in the system so that fluid does not get
into the liquid seal circuit.
7. Countermeasures for static electricity
Since static electricity may be generated depending on the fluid
being used, implement suitable countermeasures.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!