产品[
供应BURKERT传感器/宝德8030在线式流量传感器[产品打印页面]
]资料
产品名称:
供应BURKERT传感器/宝德8030在线式流量传感器
产品型号:
-
产品展商:
BURKERT
简单介绍
供应BURKERT传感器/宝德8030在线式流量传感器
to §1.3b of the directive: PN ≤ 16 bar and DN < 125
- Fluids of group 2 according
to §1.3b of the directive: PN ≤ 16 bar and DN ≤ 200
供应BURKERT传感器/宝德8030在线式流量传感器的详细介绍
供应BURKERT传感器/宝德8030在线式流量传感器
The E-shaped magnetic system inside the sensor induces a magnetic field into the fluid, which is perpendicular to the
direction of flow. Two electrodes are in galvanic contact with the liquid. Based on the Faraday law a voltage can be
measured between these electrodes once a liquid (min. conductivity of 20 μS/cm) flows along the pipe.
This voltage is proportional to the flow velocity.
Using the K-factor for the individual pipe diameter the speed of flow is converted into volume per time.
The device also complies with directive N° 97/23/EC about the devices set under pressure,
according to the following methods:
在8045发射器可以很容易地安装到任何宝得
由刚刚杀青的主要螺母插入接头系统（ S020 ） 。
小直的上游和下游的距离必须是
观察。根据管道的设计，必要的距离
可以是更大或使用流量调节器，以获得的精度。
欲了解更多信息，请参阅EN ISO 5167-1 。
EN ISO 5167-1规定了直进，出口的距离
必须在管路安装接头时须遵守
为了达到平静的流动条件。重要的
布局可能导致湍流的流动如下所示，
与相关规定的小入口和在一起
出口的距离。这些确保平静，无故障测量在测量点的条件。
流量变送器可以安装到水平或者
垂直管道。安装8045变送器在这些正确方法
获得**的流量测量。
[或为DN50 （ ）提到零件]
- Fluids of group 1 according
It has been designed and manufactured professionally (Article 3.3).
The CE mark is not for pressure.
The CE mark complies with directives 89/336/EC (EMC) and 73/23/EC (LVD).
