HAWE轴向变量柱塞泵
Ramp time rise-fall tR 0.1 ... 10 s
(Rampe linear) Ramp, linear rise time and fall
time separately adjustable factory pre-setting: 0.1 s for both
(minimum)
Enable/disable input TTL compatible or can be
triggered with a contact (if blank release output)
Dither frequency f 50 ... 100 Hz
X2-3 reference input 0 - 5 V / 0 - 10 V
X2-4 0 V, analog GND
X2-5, X2-6 Auxiliary inputs
X3 Programming interface
max. perm. ripple factor w 10% (ripple)
Required filter capacito CB 2200 μF per 1 A induction current
Output voltage UA UB - 0.7 V DC, pulse-width modulated
Output current lA max. 0 ... 2 A short circuit proof protect.
Setting range lmin 0 ... 2 A
lmax 0 ... 2 A pre-setting Imin = 0 A; Imax = 2 A
No-load current IL max. 70 mA (own consumption)
Voltage ranges Unom. adjustable, select 0 ... 5 V DC or 0 ... 10 V DC
Pre-setting: 0 ...10 V DC
Reference voltage USt 5 V DC 4%
load capacity max. 5 mA (stabilized voltage to supply potentiometer P 1)
Input resistance R >50 k{
Recommended
potentiom. P from 2 k{ up 10 k{
Design Module with plugs
Connection leads max. 1.5 mm²
Fastening Only via card holder (accessory) on 35 mm standardized support bars
Supply voltage UB 10 ... 48 V
