日本SMC防静电快换接头[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: 日本SMC防静电快换接头
产品型号: -
产品展商: SMC
简单介绍
日本SMC防静电快换接头 Fluoropolymer Fittings: Hyper Fittings/Flare Type” (M-E06- 4) for tubing connection and special tools.

日本SMC防静电快换接头的详细介绍

日本SMC防静电快换接头
适用于洁净室内驱动系统的快换接头。
金属部分：黄铜 (无电解铜离子) KPQ不锈钢 (SUS304) KPG
系列/CAD 适合软管外径连接螺纹
KP φ4,φ6,φ8,φ10,φ12 1/8,1/4,3/8,1/2
特长适用于洁净室内吹气系统用快换接头。
完全禁油处理 (氟橡胶涂层)
接液部为非金属。
洁净室内零件清洗、组装、2层包装。
真空可使用 (-100kPa)
1. Confirm the specifications.
Give careful consideration to operating conditions such as the
application, fluid and environment, and use within the operating
ranges specified in this catalog.
Operate within the indicated fluid temperature range.
3. Maintenance space
Ensure the necessary space for maintenance and inspections.
4. Fluid pressure range
Keep the supplied fluid pressure within the operating pressure
range shown in the catalog.
5. Countermeasures for static electricity
Since static electricity may be generated depending on the fluid
being used, implement suitable countermeasures.
1. After mounting, perform suitable function
and leak tests to confirm that the mounting
1. Connect tubing with special tools
Please refer to the LQ3 series mounting method in “High Purity
1/8 turn. As a guide, refer to the proper
tightening torques shown below.
Also, when the nut requires extra tightening,
please conduct this job in accordance with
the instruction manual.
Nut Tightening Torque for Piping
3. Use sealant tape for piping the taper thread
parts such as the LQ3H and LQ3L.
Tape the ridges tightly with the sealant tape, starting one ridge
width left from thread end side. 3 to 4 sealant tapes are required.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!