产品[
EAE3000-F03-5DZ-Q，进口SMC气动三联体[产品打印页面]
]资料
产品名称:
EAE3000-F03-5DZ-Q，进口SMC气动三联体
产品型号:
-
产品展商:
SMC
简单介绍
EAE3000-F03-5DZ-Q，进口SMC气动三联体
Example) Changing the tubing from an O.D. 1/4" to O.D. 1/8" in body class 2.
Prepare an insert bushing and nut for O.D. 1/8" tubing (LQ-2U03) and change the tubing size.
EAE3000-F03-5DZ-Q，进口SMC气动三联体的详细介绍
EAE3000-F03-5DZ-Q，进口SMC气动三联体
寿命：1000万次，采用聚氨酯合成橡胶座阀阀芯提高了高压环境下的耐久性。
在导向环(滑动)部分使用NSF-H1认证的润滑脂。
采用间隙密封型溢流阀，提高耐久性。
滑动部采用特殊氟素树脂密封材料。放置稳定，不易受压力影响。
1. Connecting tubes with special tools.
Refer to the pamphlet: High-Purity Fluoropolymer
Fittings HYPER FITTINGS®/Series LQ1,2 Work
Procedure Instructions (M-E05-1) for tube connection
2. Tighten the nut until the body end.
Refer to the proper tightening torque below
Be sure to read before handling. Refer to front
matters 42 and 43 for Safety Precautions and pages
622 and 623 for Specific Product Precautions.
Specific Product Precautions
Test method and conditions
The liquid contact portions were filled with sulphuric acid and left untouched
for half an hour. After the sulphuric acid was drained, the wetted parts are
filled with DI water. The specific resistance of the liquid discharged from the
outlet side of the sample was measured and recorded.
∗Data provided in this section is just one example of the actually measured
values. Application examples illustrated in this flyer do not guarantee the
result of applicable use of this product.
Particle counters were installed before and after the test sample.
The amount of particle generated from the sample is determined by the
difference in output values from each counter.
Flow rate of supplied DI water: 100 ml/min
