SMC真空发生器，ZH10BS-06-06[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SMC真空发生器，ZH10BS-06-06
产品型号: -
产品展商: SMC
简单介绍
SMC真空发生器，ZH10BS-06-06 同时按下q设置，把压力设定开槽螺钉E“P.SET” （逆时针减小），观察LCD。当LCD 显示正确的数字时，停止转动“P.SET”并释放SET按钮。设定压力被显示在压力显示面板R LCD。（顺时针旋转增加压力）。当管路压力下降到内规定的低允许10％压时，液晶箭头指示（前侧）闪烁，以指示的条件。当管路压力下降到低于既定

SMC真空发生器，ZH10BS-06-06的详细介绍

SMC真空发生器，ZH10BS-06-06
Note 1) D-A9/A9V cannot be mounted on ø50.
Note 2) The following auto switches cannot be mounted on ø125 to ø160.
D-G39C, K39C, A3C, A44C, G5, K59, G5W, K59W, G5BAL, G59F,
G5NTL, B5, B64, B59W, P4DWL.
∗ Since the operating range is provided as a guideline including hysteresis, it
cannot be guaranteed (assuming approximately ±30% dispersion). It may vary
substantially depending on an ambient environment.
使用压力范围(MPa)
环境及流体温度
条件:水平安装，0.5MPa,电磁阀直接安装在
锁开放通口上，负载质量是允许值上限。
(ø180,ø200带磁性开关
0～60℃(带磁性开关)
0～70℃(无磁性开关) (但未冻结)
Pressure sensor and switch in one compact
body; Economical use of space; Simplified
operation; Combined functions.
Pressure switch with digital display and
self-contained solid state sensor
Minimum allowable pressure indicator on
Normally, the LCD displays line pressure.
When the SET button is pressed the set pressure
is displayed. At this time, the user is capable
of determining the difference between
the line and set pressure.
When LINE pressure is within 10% of the current
minimum allowable setting, the ARROW at the
lower left corner of the LCD flashes.
Fault alarm indicator light
When pressure drops below the current minimum
allowable, this red LED illuminates.
Simplified pressure setting
P.SET····Pressure setting trimmer
Push button: If the SET is pressed, set pressure
will be displayed digitally, enabling to set
pressure over looking at it visually.
Set pressure display
A variety of installation options
Screw included········M5,
Mounting bracket···· M5 type only

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!