SMC压力开关，日本SMC压力开关[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: SMC压力开关，日本SMC压力开关
产品型号: -
产品展商: SMC
简单介绍
SMC压力开关，日本SMC压力开关 series because it is the non-lube style. 1. Operating the pneumatic circuit Instead of the conventional reciprocal air cylinder circuit, use an pneumatic

SMC压力开关，日本SMC压力开关的详细介绍

SMC压力开关，日本SMC压力开关
Before piping is connected, it should be
thoroughly blown out with air (flushing)
or washed to remove cutting chip,
cutting oil and other debris from inside
2. The load on the piston rod
Use the cylinder in the state in which
the load to the piston rod is always
applied in the axial direction. This must
be more strictly adhered to than with
ordinary air cylinders. Furthermore, use
a guide to control the movement of the
load so as not to cause chatter or twist.
3. A rotational force against the piston
Avoid applying a rotational force
against the piston rod. In particular, the
application of a rotational force must be
prevented when in a lock-up state.
4. Protecting the sliding portion of the
Use caution that no scratch or dent will
be given to the slide part of the guide
rod, as this could damage the seals
and lead to leaks or faulty lock-up.
It is not necessary to lubricate the CL
circuit, in which measures are taken to
prevent the piston from lurching after
the lock-up has been disengaged.
2. Lock-up direction
The lock-up is unidirectional. The
locking direction is in accordance with
the position of the lock-up port, as
shown in the figure below.
Extension locking

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!