产品[
SMC带快换接头的残压排气阀，SY5120-5DZD-01[产品打印页面]
]资料
产品名称:
SMC带快换接头的残压排气阀，SY5120-5DZD-01
产品型号:
-
产品展商:
SMC
简单介绍
SMC带快换接头的残压排气阀，SY5120-5DZD-01
3. Do not direct the tip of the nozzle at the face or
other parts of a human body. It may cause danger
SMC带快换接头的残压排气阀，SY5120-5DZD-01的详细介绍
SMC带快换接头的残压排气阀，SY5120-5DZD-01
1 。上的供给压力侧安装一个截止阀
吹枪，使紧急情况下关闭
的意外泄漏或损坏。
2 。当在喷枪上安装一个喷头，密封包装
喷嘴的螺纹围绕胶带。
3 。当安装喷嘴，固定喷嘴保持
吹枪应用的22毫米的扳手
对边宽度为两个斜切面
不施加力到主体支架。然后
拧紧内下列用力喷嘴
扭矩范围。作为一个指导原则，它相当于2
3个附加轮流用后手动工具
喷嘴拧紧力矩范围12〜 14 N ？米
1 。确认好型号，类型和大小安装前。
另外，还要确保有上无划痕，擦伤或裂纹
1. Do not use in an atmosphere of corrosive gases,
chemicals, sea water, water or water vapor or in an
environment where such substances may adhere.
2. Provide shading in an environment where the
product is exposed to the sunlight.
3. Do not use in an environment where a heat source
is at a close distance.
4. Do not use in an environment where static
electricity is a problem. It may cause malfunction or
failure of the system. Consult with SMC for use in
5. Do not use in an environment where spatters are
generated. There is danger of fires caused by
spattering. Contact SMC for use in such an
6. Do not use in an environment where the product is
directly exposed to cutting oil, lubricant oil or
coolant oil. Contact SMC for use in this kind of
1. To prevent lurching of the nozzle due to air
pressure, confirm that the nozzle is not loosened or
rattling by pulling it by hand before operation.
2. Be sure to wear safety goggles to protect yourself
from splashed substances.
to personnel.
4. Do not use the product to clean or remove toxic
substances or chemicals.
5. Do not drop, step on or hit the product. It may cause
damage to the product.
6. Do not use the product to disturb public order or
public hygiene.
7. This product is not a toy.
8. After blowing, be sure to hang the product on a
