ASCO电磁阀参数，VCEFCM8223G010V,220/50[产品打印页面]

ASCO电磁阀参数，VCEFCM8223G010V,220/50
ASCO flow controls and other similar components must be installed in the cylinder lines only.
Diaphragm and main disc FKM only (pilot is low-temperature NBR); Ambient temperature range is 32°F to 149°F.
 Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 15 psi Operating Pressure Differential when
is in the internal position.
 Can be used for dry natural gas service (no agency approvals) with the EF or EV prefix without manual operator.
 Normally closed = 130 psi. Normally open = 105 psi.
 Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.
 SIL 3 Capable, Certified by Exida, only valid when used as Normally Closed.
† Dual solenoid 8344 requires minimum pressure of 20 psi. Single solenoid version has 10 psi minimum pressure requirement.
†† UL/CSA approved for use with dry natural gas or propane gas with EF or EV prefix without manual operator.
•模压一体式电磁阀与高效电磁阀
墨盒和0.55 W低功率线圈
•149°F标准环境温度（65°C）
•可选176°F（80°C）的高环境​​温度版本
•在说明书控制自动化设计用于
系统提供：PLC和DCS？对于总线网络的兼容性和
UL和CSA认证为I类。 1地点和I级
息。 2非易燃电磁阀用于危险场所。
UL认证的通用阀门。
符合适用的CE指令。
SIL3能够根据IEC61508在8314，8316，8551，和
8553常量。通过提供EXIDA第三方认证。
是指工程的详细内容。
标准：防水，类型1，2，3，3S，4和4X。
可选：防爆和防水，类型3，3S，
4，4X，6，6P，7和9。
（订购时请加前缀“EF”，以目录号。对于
防爆带316不锈钢轮毂和
浪涌抑制版本：EV MF8314H30124VDC
 

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!