如果您对该产品感兴趣的话,可以
产品名称:
日本SMC真空调压阀，VP544-5DZ1-03A
产品型号:
VP544-5DZ1-03A
产品展商:
SMC
简单介绍
日本SMC真空调压阀，VP544-5DZ1-03A
Cord O.D.: ø3.5 to ø7
(Reference) 0.5 mm2 2-core and 3-core wire equivalent to JIS Removing procedure
1. Loosen the clamp screw on the
日本SMC真空调压阀，VP544-5DZ1-03A的详细介绍
日本SMC真空调压阀，VP544-5DZ1-03A
注3 ）手动仅适用于DIN端子型可供选择。
注4 ）耐振动：不发生故障，在一扫描测试8.3和2000赫兹之间。测试
在两个通电和断电状态下进行的轴和右
主阀和电枢（在初始状态下的值）的角方向。
抗冲击性：从冲击试验用跌落冲击试验机无故障导致。该
试验是在主阀的轴和直角方向上进行的，并
电枢为通电和断电状态（在初始状态下的值）。
2. After removing the tightening screw, divide the terminal block
and housing by prying open the slot area of the lower part of
the terminal block open with a screwdriver.
3. Loosen the terminal screws of the block and insert stripped
lead wires in accordance with the wiring diagram. Secure each
wire by re-tightening the terminal screw (In the case of terminal
1: (+), 2: (-) DC)
4. Tighten the ground nut to secure the cable wire.
Change of electrical entry
Wire entry can be changed by mounting the housing in either direction
(four directions at every 90°) after dividing the terminal
block and the housing.
∗ For the indicator lighted style, be careful not to damage the light
with the lead wire of the cable.
Insert a connector straight or pull it out straight, using caution it
does not be tilted.
Applicable cable
“ ” side of both ends of the
manifold.
2. Lift the “ ” side of the manifold
off the DIN rail and slide it
in the direction of the arrow.
Mounting procedure
1. Hook the mounting hook on the
“ ” side of the manifold base to
the DIN rail.
2. Press down side “ ” and mount
the end plate on the DIN rail.
Tighten the clamp screw on side
“ ” of the end plate.
