ASCO二位四通电磁阀[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: ASCO二位四通电磁阀
产品型号: 8342G020 220VAC
产品展商: ASCO
简单介绍
ASCO二位四通电磁阀 IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.

ASCO二位四通电磁阀的详细介绍

ASCO二位四通电磁阀
膜片阀，先导，具有完全的孔口。根据标准/ UL和CSA UL和CSA
适用于液体和气体流体（验证关闭的兼容性PA PET PET
的流体接触的材料）。玻璃纤维玻璃纤维玻璃钢
封装材料
钢筋钢筋加固
􀁦技术特点绝缘等级F （155° C ）F （155° C） H（ 180 °C ）
（ PS ）允许压力20bar的环境温度-10 ° C +60 ° C -10 ° C +60 ° C -10 ° C +75 °C
开馆时间从300ms的〜〜 1500毫秒连续工作ED 100 ％
截止时间从〜 1000毫秒〜 2000毫秒电气连接DIN 46340 - 3极插头连接器
流体温度-10 °C +90°C （ NBR ） IP 65 IP 67 IP 67
0 °C +130 °C（ FPM ）（EN 60529）（EN 60529）（EN 60529）
粘度为5 ° E（〜37 cStokes Ø平方毫米/秒）
防护等级
插头插头插头连接器
电压DC陈竺： 12-24V （ +10 ％-5％）
􀁦接触的材料流体交流ZB ： 24V/50-60Hz - 115V/50Hz - 230V/50-60Hz
阀体黄铜（ +10％-15％）
密封NBR或FPM （其它电压和频率要求）。
内部元件黄铜和不锈钢
座椅的黄铜ZC12A - ZC14A ： UL待批准
There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere.
For "Quick Exhaust" valves, pressure port is 1/20", exhaust port is 1/4".
IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
Diaphragm and main disc FKM only (pilot is low-temperature NBR).
Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 15 psi Operating Pressure Differential when selection gasket
is in the internal position.
Normally closed = 130 psi. Normally open = 105 psi.
PFDAVG is only valid when used as Normally Closed

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!