如果您对该产品感兴趣的话,可以
产品名称:
F68G-NND-AR1，英国NORGREN过滤器
产品型号:
F68G-NND-AR1
产品展商:
NORGREN
简单介绍
F68G-NND-AR1，英国NORGREN过滤器
System designers must provide a warning to end users in the
system instructional manual if protection against a failure modecannot be adequately provided.
F68G-NND-AR1，英国NORGREN过滤器的详细介绍
F68G-NND-AR1，英国NORGREN过滤器
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and temperatures
can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
within published specifications, consult Norgren
阀芯类型 代号
金属密封阀芯 G
软密封阀芯 S
阀功能 代号
2 x 3/2 NC A
2 x 3/2 NO B
2 x 3/2 NC 和 NO C
5/2 5
5/3 中封式 6
5/3 中泄式 7
电压
24V DC 1.2W
115V DC 1.5W
手动控制
旋转按下式
只按下
按钮式(外置)
驱动方式/先导供气
电控/弹簧 内先导
电控/弹簧 外先导
电控/电控 内先导
电控/电控 外先导
电控优先 14/电控(仅5/2) 内先导
电控优先 14/电控(仅5/2) 外先导
电气参数
电压允差： 24 V d.c. 0,6 W ±10％
电压允差： 115V AC
负荷率： 100%
入口节流： 0.8mm
指示： 绿色 LED
浪涌抑制： 续流二极管
材质： PPS(本体)，VITON和NBR(密封)
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
products.
Water vapor will pass through these units and will condense into liquid
air temperature drops in the downstream system. Install an air dryer if
water condensation could have a detrimental effect on the application.
