BURKERT流量变送器介绍[产品打印页面]

]资料

点击看大图

如果您对该产品感兴趣的话,可以

产品名称: BURKERT流量变送器介绍
产品型号: 8035型
产品展商: BURKERT
简单介绍
BURKERT流量变送器介绍金属接头 PN 16 浸湿部件塑料接头 PVC, PP, PVDF 金属接头黄铜，不锈钢1.4404/316L 涡轮 PVDF 轴和轴承陶瓷 O形圈 FPM

BURKERT流量变送器介绍的详细介绍

BURKERT流量变送器介绍
通径8.0-50 mm
液体流量测量
流量显示包括2个累加器
一体式、面板式或墙装式
批量控制器具有3种批量模式（现场按键输入、
二进制输入和时间比例触发批量控制）重复性 0.4% o.R.
防护等级带电缆插座IP 65
相对湿度 ≤ 80%, non condensated
介质温度（参见压力-温度图）
PVC/PP接头 0 to +50/+80 °C
PVDF、黄铜、不锈钢接头 0 to +100 °C
环境温度 0 to +60 °C
贮存温度 0 to +60 °C
HT ENGLISH
Power supply 12-36 VDC, filtered and regulated
Current consumption ≤ 10 mA (no load)
Protection against
polarity reversal yes
Output data transistor NPN and PNP, open collector, 700 mA max., NPN output: 0,2-30 VDC and
PNP output: supply voltage (see example in the Annex)
frequency: up to 250 Hz (frequency = K factor x flow rate; for the value of the K factor,
refer to the instruction manual of the fitting)
Protection against
short-circuits yes
Cable length max. 50 m, shielded (up to 500 m depending on the cable impedance and the current
consumption)
Electrical connection
Pulse or sinus version EN 175301-803 connector (type 2508, supplied)
Type of cable recommended shielded, wire section between 0.14 and 0.5 mm2
Materials
Housing / Cable gland PPS, glass fiber reinforced / PA
Fitting S030HT, paddle-wheel stainless steel
Bearings of fitting S030HT Iglidur
Seal / axis of fitting S030HT FKM / ceramics
Environment
Ambient temperature - pulse version: -15 to +80° C
(operating and storage) - sinusoidal version: -15 to +100° C
Relative humidity <80%, non condensated
Protection rating (housing) IP 65, connector plugged-in and tightened
介质压力
塑料接头 PN 10（参见压力-温度图）
金属接头 PN 16
浸湿部件
塑料接头 PVC, PP, PVDF
金属接头黄铜，不锈钢1.4404/316L
涡轮 PVDF
轴和轴承陶瓷
O形圈 FPM
其它材质
电子部件壳体 PC
前面板薄片 Polyester
通径 DN 8 - DN 50
流量变送器
工作电源 12 to 30 V DC, 230 V AC
输出信号 4 - 20 mA

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!