主营产品:阀门、气动元件、仪器仪表、电子元器件
产品[

SMC多级真空发生器,ZL112-G[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以
产品名称: SMC多级真空发生器,ZL112-G
产品型号: ZL112-G
产品展商: SMC
简单介绍
SMC多级真空发生器,ZL112-G 多级真空发生器 ZL 系列/CAD 特长 ZL 采用3级扩压段,吸入流量增加。 可选择数字真空开关、真空压力表等功能。 SMC多级真空发生器,ZL112-G

SMC多级真空发生器,ZL112-G的详细介绍

SMC多级真空发生器,ZL112-G

电话:O21-3952 9829/3O-8O1O
传真:O21-6O83 1959
手机:189 1857 2467
Q:125 5O9 6653
联系人:张海情
邮箱:8010@shqiantuo.com.cn

多级真空发生器   ZL
 系列/CAD 特长
ZL  采用3级扩压段,吸入流量增加。
可选择数字真空开关、真空压力表等功能。

ZL系列
具体产品使用注意事项1
处理之前,请务必阅读。
请参阅前面事项38和39的安全说明和第844页至846页为真空
设备的注意事项。

操作器阀门
慎重
1。当气源接通时,产生的真空
从喷嘴喷出的压缩空气的流动的扩压器。
真空释放时变为ON时,这种真空是迅速
释放的空气通过释放流量调节
针和真空口的流量。

操作环境
慎重
1。避免使用暴露在阳光直射。

电磁阀(ZL112系列)
慎重
1。对于特定电磁阀产品precuations,请参阅
电磁阀(系列SYJ500)目录。

<阅读Graph>方法>
的流动特性表明真空度之间的关系
压力和喷射器的吸入流速,并表明,当
吸气流速改变真空压力也会改变。一般情况下,
这表明喷射器的标准工作压力的关系。
在该曲线图中,P表示的真空压力,尿流率(Qmax)
表示的的吸引流率。这些的值
规格目录,出版等在真空压力的变化
解释如下。
1。如果喷射器的吸入口的关闭和密封
紧,吸气流率变为“0”和
真空压力增加到
(功率)。
2。如果被打开,允许空气的吸入口
流(漏气),吸入流速
增大,真空压力降低。
(P1和Q1的条件)
3。如果完全打开的吸入口,
吸引流率增加到
尿流率(Qmax),然后真空压力下降
几乎为“0”(大气压力)。何时
吸附渗透或工件
受泄漏等,需要谨慎的
真空压力不会很高。

SMC多级真空发生器,ZL112-G

Series ZL
Specific Product Precautions 1
Be sure to read before handling.
Refer to front matters 38 and 39 for Safety Instructions and pages 844 to 846 for Vacuum
Equipment Precautions.

Operation of Ejector Valves
Caution
1. When the air supply is turned ON, vacuum is generated by
the flow of compressed air from the nozzle to the diffuser.
When the vacuum release is turned ON, the vacuum is quickly
released as air passes through the release flow adjustment
needle and flows to the vacuum port.

Operating Environment
Caution
1. Avoid use exposed to direct sunlight.

Solenoid Valves (Series ZL112)
Caution
1. For specific product precuations on solenoid valves, refer
to the solenoid valve (Series SYJ500) catalog.

<How to Read the Graph>
The flow characteristics indicate the relationship between the vacuum
pressure and the suction flow rate of the ejector, and show that when the
suction flow rate changes the vacuum pressure also changes. In general,
this indicates the relationship at the ejector’s standard operating pressure.
In the graph, Pmax indicates the maximum vacuum pressure, and Qmax
indicates the maximum suction flow rate. These are the values that are
published as specifications in catalogs, etc. Changes in vacuum pressure
are explained below.
1. If the ejector’s suction port is closed and sealed
tight, the suction flow rate becomes “0” and the
vacuum pressure increases to the maximum
(Pmax).
2. If the suction port is opened and air is allowed to
flow (the air leaks), the suction flow rate
increases and the vacuum pressure decreases.
(the condition of P1 and Q1)
3. If the suction port is opened completely, the
suction flow rate increases to the maximum
(Qmax), while the vacuum pressure then drops
almost to “0” (atmospheric pressure). When
adsorbing work pieces which are permeable or
subject to leakage, etc., caution is required as the
vacuum pressure will not be very high.

SMC多级真空发生器,ZL112-G

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!



名称:上海乾拓贸易有限公司
上海地址:上海市嘉定区嘉涌路99弄6号713室

联系人:罗丹
QQ:1322728622
直线电话:021-39526590
联系人: 18917038407(同微信)
邮箱:18917038407@163.com



联系人:章莹玲
企业QQ:956657052
手机;18918572467(微信) 
电话;021-69000973
邮箱:18918572467@163.com


联系人:王亚波
QQ:1274173590
021-39529839-8012
手机:17321056802(同微信)
邮箱:17321056802@163.com


上海乾拓贸易有限公司    地址:上海嘉定嘉涌路99弄6号713    邮编:
联系人:单先生    电话:021-69000975   手机号码:18918574312    传真:021-39947181
沪ICP备09006758号-2  
 

沪公网安备 31011402005013号

点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息