图尔克一体式传感器，FCI-D20A4P-AP8X-H1141
电话：O21-3952 9829/3O-8O1O
传真：O21-6O83 1959
手机：189 1857 2467
Q：125 5O9 6653
联系人：张海情
邮箱：8010@shqiantuo.com.cn
流量传感器
一体式在线流量传感器
液体监测流量传感器
热式功能原理
电位计调节
通过LED显示流量状态
工作范围4 … 30 l/min
3线直流, 21…30 VDC
常开，pnp输出
M12 x 1接插件
剂量率监测
许多液体配料应用程序与时间相关的。
FCI紧凑监控恒速流在配料过程，从而确保相同的流量。凭借其出色的响应时间，非常适合传感器的应用比例间隔短。
润干泵的保护
如果监视任务涉及检测泵是否实际提供的介质，监测泵的进料压力是不够的。
FCI紧凑型监视实际流量与指示的流速的变化。因此，泵系统安全地运行干燥的保护。
修理或更换的成本和系统停机时间被淘汰。
灌装系统流量监控
为了满足苛刻的灌装线的质量保证要求，必须保证它的剂量率在灌装过程中始终是相同的。这是另一个因素，能够可靠地监视FCI紧凑型。
如果FCI连接器与模拟输出时，即使是轻微的偏差灌装量可以被检测出来。
冷却回路的监测
工具和安装组件的不断流动的冷却和润滑剂的润滑和冷却的过程中进行监测，以避免系统损伤。
FCI紧凑立即注册缺少流量和信号需要关机的机器和系统。
Dosage rate monitoring
Many liquid proportioning applications are timing dependent.
The FCI compact monitors the contstant flow during proportioning procedures and thus ensures identical flows. With its excellent response time, the sensor is perfectly suited to applications with short proportioning intervals.
Run-dry protection of pumps
If the monitoring task involves detection of whether the pump is actually delivering the medium, monitoring of the pump’s feed pressure is not sufficient.
The FCI compact monitors the actual flow rate and indicates a change in the flow speed. Pump systems are thus securely run-dry protected.
Repair or replacement costs and system down-times are eliminated.
Flow monitoring in filling systems
To meet the demanding requirements of quality assurance in filling lines, it must be assured that the dosage rate is always identical during the filling procedure. This is another factor that is reliably monitored by the FCI compact.
If an FCI with analogue output is used, even minor deviations of the filling volume can be detected.
Monitoring of cooling circuits
During lubrication and cooling of tools and installation components the constant flow of cooling and lubricating agents has to be monitored to avoid system damages.
The FCI compact immediately registers missing flows and signals the need to shut-down machines and systems.
