易福门分体式流量传感器，SF5350[产品打印页面]

易福门分体式流量传感器，SF5350

电话：O21-3952 9829/3O-8O1O
传真：O21-6O83 1959
手机：189 1857 2467
Q：125 5O9 6653
联系人：张海情
邮箱：8010@shqiantuo.com.cn
公司网址：www.qiantuomy.com

分体式流量传感器
用于适配器
电缆
系统接口: 用于适配器的内螺纹M18 x 1.5
 使用范围
应用范围   液体和气体介质
介质温度 液体介质 [°C]  -25...80
介质温度 气体介质 [°C]  -25...80
 电气数据
连接控制显示器   VS3000
 测量/设定范围
液体介质 
设定范围 [cm/s]  3...300 
*大灵敏度时的测量范围 [cm/s]  3...60 
气体介质 
设定范围 [cm/s]  200...3000 
*大灵敏度时的测量范围 [cm/s]  200...800 
 精度/偏差
介质温度梯度*大值 [K/min]  300
 反应时间
反应时间 [s]  1...10
 环境条件
抗压强度 [bar]  300
外壳防护等级   IP 67
 认证/测试
抗冲击   DIN IEC 68-2-27: 40 g (11 ms)  
 
抗震   DIN IEC 68-2-6: 10 g (55...2000 Hz)  
 
MTTF [年]  8213
 机械技术数据
系统接口   用于适配器的内螺纹M18 x 1.5
材料(潮湿部件)   不锈钢 (316S12); O形环: FPM 8 x 1.5 gr 80° Shore A
外壳材料   不锈钢 (316S12)
探杆长度 L [mm]  45
重量 [kg]  0.401
 电气连接
接口   PUR电缆 / 6 m; 5 x 0.34 mm²
*大的导线长度 [m]  100 (5 x 0.5mm²)

易福门分体式流量传感器，SF5350

Function and features
In conjunction with the VS3000 control monitor the flow sensor monitors flows in
liquids and gases.
The sensor / control monitor combination senses whether a preset flow value has
been reached (= medium flowing) or not (= medium not flowing) and provides a
switched signal.
Installation
The unit is adaptable for various process fittings (adapters to be ordered separately
as accessories).
• In the case of horizontal pipes mount the unit from the side, if possible (fig. 1).
When the unit is to be mounted at the bottom of the pipe, it should be free from
deposits.
When the unit is to be mounted at the top of the pipe, it should be completely
filled with the medium to be monitored.
• In the case of vertical pipes mount the unit in a place where the medium flows
upwards (fig. 2).
Components integrated in the pipes, bends, valves, reductions, etc. lead to turbulence
of the medium. This affects the function of the unit.
Recommendation: Adhere to the distances between sensor and sources of
interference:
D = pipe diameter; S = sources of interference
4: thread M18 x 1.5
1. Lubricate the nut (3) and all threads with grease to ensure the nut can be
loosened and tightened several times.
Note: No grease must be applied to the sensor tip (A).
2. Screw the suitable adapter (2) onto the process fitting (1).
3. Insert the flow sensor into the adapter and tighten the nut (3); (max. tightening
torque 50 Nm).
Insertion depth of the sensor: min. 12 mm in the pipe. When the adapters are
used which are available as accessories the correct depth is ensured.
Note: The sensor tip must not touch the pipe wall.

易福门分体式流量传感器，SF5350

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!