TURCK电感式传感器，NI35-CP40-Y1X/S100
电话：O21-3952 9829/3O-8O1O
传真：O21-6O83 1959
手机：189 1857 2467
QQ：125 5O9 6653
联系人：张海情
邮箱：8010@shqiantuo.com.cn
ATEX 防爆认证II 组设备，设备等级2G. 可
用于气体危险1区
ATEX防爆认证 II 组设备，工作温度70°C
时，可用于粉尘危险0区
符合SIL2和IEC 61508标准
方型外壳，厚度40 mm
感应面可调9个方向
塑料, PBT-GF30-V0
耐高温到100℃
2线直流, nom. 8.2 VDC
输出遵循本安型DIE60947-5-6
(NAMUR)标准
接线端子
额定工作距离Sn 35 mm
安装方式非齐平
实际测量范围ð (0,81 x Sn) mm
修正系数St37 = 1, V2A = 0.7, Ms = 0.4, Cu = 0.3, Al = 0
重复精度ð 2 %
温度漂移ð ± 10 %
ð ± 20 %, ï +70 ℃
磁滞1…10
环境温度-25…+100
针对防爆区域应用参考使用说明
输出性能2线, NAMUR
开关频率e 0.08 kHz
电压Nom. 8.2 VDC
无激励电流损耗. 2.1 mA
激励电流损耗e 1.2 mA
认证依据KEMA 02 ATEX 1090X
内置 电感(Li) / 电容 (Ci) 250 nF / 350 μH
防爆标志é II 2 G Ex ia IIC T6/II 1 D Ex ia D 20 T95 °C
( Ui = 20 V, Ii = 60 mA, Pi = 200 mW)
警告防静电
设计方型, CP40
尺寸114 x 40 x 40
外壳材料塑料, PBT-GF30-V0, 黑
连接接线端子
夹紧能力e 2.5 mm2
防震动性55 Hz (1 mm)
防冲击性30 g (11 ms)
防护等级IP67
开关状态指示LED指示灯 黄
功能原理
电感式传感器以无磨损和非接触的方式来检测
金属物体 基于此目的它通过高频交流电磁场来
检测被测物 对电感式传感器而言，磁场由绕在
铁氧体芯线圈上的LC振荡电路产生。
特殊型电感式传感器能被用于-60℃到
+250℃。
TURCK电感式传感器，NI35-CP40-Y1X/S100
ATEX approval Group II equipment, equipment level 2G.
For gas hazardous Zone 1
ATEX Certified Group II equipment, operating temperature 70 ° C
Can be used for dust hazardous zone 0
Comply with SIL2 and IEC 61508
Square shell thickness of 40 mm
Sensing surface adjustable nine direction
Plastics, PBT-GF30-V0
High temperature to 100 ° C.
2-wire DC, nom. 8.2 VDC,
Output to follow Intrinsically Safe DIE60947-5-6
(NAMUR) standard
Terminals
Rated operating distance Sn a 35 mm
Installation non-flush
The actual measurement range ð (0,81 x Sn) mm
Correction coefficient St37 = 1, V2A = 0.7, Ms = 0.4 and Cu = 0.3, Al = 0
Repeatability ð 2%
Temperature drift ð ± 10%
ð ± 20%, ï +70 ° C
Hysteresis 1 ... 10
Ambient temperature -25 ... +100
Application Reference instructions for hazardous areas
Output performance, 2-wire, NAMUR
Switching frequency of e 0.08 kHz,
Voltage Nom. 8.2 VDC
Loss of excitation current 2.1 mA,
Excitation current loss e 1.2 mA
Certification in accordance with KEMA 02 ATEX 1090X
Built-in inductance (Li) / capacitor (Ci) of 250 nF / 350 μH
Explosion-proof mark é II 2 G Ex ia D Ex ia D 20 the T95 ° C, the IIC T6/II
(Maximum Ui = 20 V, Ii = 60 mA, Pi = 200 mW)
Warning anti-static electricity
Square design, CP40
Dimensions 114 x 40 x 40
Plastic shell material, PBT-GF30-V0, black
The connection terminals
2.5 mm2 clamping capacity e
Anti-vibration 55 Hz (1 mm)
30 g of anti-shock (11 ms)
Degree of protection IP67
Switch status indication LED indicator yellow
Function Principle
Inductive sensors to detect a wear-free and non-contact manner
Metal objects For this purpose, it came through the high-frequency alternating current field
Detection measured on inductive sensors, the magnetic field around the
LC oscillator circuit to generate on the ferrite core coil.
Special type of inductive sensors can be used to -60 ° C to
+250 ℃.
TURCK电感式传感器，NI35-CP40-Y1X/S100
