日本SMC单作用型隔膜泵，PB1011A-01-BN
电话：O21-3952 9829/3O-8O1O
传真：O21-6O83 1959
手机：189 1857 2467
QQ：125 5O9 6653
联系人：张海情
邮箱：8010@shqiantuo.com.cn
公司网站：www.qiantuomy.com
隔膜泵／单作用型 PB
系列/CAD 动作方式 输出流量 (L/min) 接液部材质
PB1000 PB1011 内置电磁阀型 0.008～2 聚丙烯
PB1013 气控型 0.008～0.5
Required specification example: Find the pilot air pressure and pilot air consumption
for a discharge rate of 600 ml/min and a discharge pressure of 0.15 MPa.
<The transferred fluid is clean water (viscosity 1 mPa·s, specific gravity
1.0) solenoid valve cycle 5 Hz>
∗ If the total lifting height is required instead of the discharge pressure,
a discharge pressure of 0.1 MPa corresponds to a total lift of 10 m.
Selection procedure:
1. First mark the intersection point for a discharge rate of 600 ml/min and a
discharge pressure of 0.15 MPa.
2. Find the pilot air pressure for the marked point. In this case, the point is
between the discharge curves for 0.35 MPa and 0.5 MPa, and based on
the proportional relationship to these lines, the pilot air pressure for this
point is approximately 0.4 MPa.
Find the air consumption for operation with a 5 Hz switching cycle
and pilot air pressure of 0.35 MPa from the air consumption graph.
Selection procedure
1. Look up from the 5 Hz switching cycle to find the intersection with
SUP = 0.35 MPa.
2. From the point just found, draw a line to the Y-axis to find the air consumption.
The result is approximately 9 l/min (ANR).
1. These flow characteristics are for fresh water (viscosity 1 mPa·s,
specific gravity 1.0).
2. The discharge rate differs greatly depending on properties (viscosity,
specific gravity) of the fluid being transferred and operating conditions
(density, lifting range, transfer distance), etc.
Required specification example:
Find the pilot air pressure and pilot air consumption for a discharge rate
of 270 ml /min, and a viscosity of 15 mPa·s..
Selection procedure:
1. First find the ratio of the discharge rate for fresh water when viscosity
is 15 mPa·s from the graph to the left. It is determined to be 45%.
2. Next, the viscosity of 15 mPa·s and the discharge rate of 270 l/min in
the required specification example are converted to the discharge
rate for fresh water. Since 45% of the fresh water discharge rate is
equivalent to 270 ml /min in the required specifications, 270 ml /min ÷
0.45 = approximately 600 ml/min, indicating that a discharge rate of
600 ml/min is required for fresh water.
3. Finally, find the pilot air pressure and pilot air consumption based on
viewing of the flow characteristics.
Viscosity: Transfer is possible up to about 100 mPa·s.
Dynamic viscosity ν = Viscosity μ/Density ρ.
日本SMC单作用型隔膜泵，PB1011A-01-BN
隔膜泵／双作用型 PA/PAP/PAX
系列/CAD 动作方式 输出流量 (L/min) 接液部材质
PA3000 PA3□□0 自动运转型 1～20 ADC12
(铝)
SCS14
(不锈钢)
PA3□13 气控型 0.1～12
PA5000 PA5□□0 自动运转型 5～45
PA5□13 气控型 1～24
PAP3000 PAP3310 自动运转型 1～13 New PFA
(氟素树脂)
PAP3313 气控型 0.1～9
PAX1000 PAX1□12 内置振动减衰器
自动运转型 0.5～10 ADC12
(铝)
SCS14
(不锈钢)
隔膜泵／单作用型 PB
系列/CAD 动作方式 输出流量 (L/min) 接液部材质
PB1000 PB1011 内置电磁阀型 0.008～2 聚丙烯
PB1013 气控型 0.008～0.5
非金属泵／双作用型 PAF
系列/CAD 动作方式 输出流量 (L/min) 接液部材质
PAF3000 PAF3410 自动运转型 1～20 New PFA
(氟素树脂)
PAF3413 气控型 1～15
PAF5000 PAF5410 自动运转型 5～45
PAF5413 气控型 5～38
日本SMC单作用型隔膜泵，PB1011A-01-BN
