德国IFM光电传感器，OGT102
电 话：O21-3952 9829/3O-8O1O
传 真：O21-6O83 1959
手 机：189 1857 2467
QQ：125 5O9 6653
联 系人：张海情
邮 箱：8010@shqiantuo.com.cn
产品特征
漫反射传感器
螺纹结构
M18 x 1
接插件
电位器
检测距离 10...400mm (参照白纸200 x 200 mm, 90 %反射)
可设定
电气数据
电气设计 DC NPN
工作电压 [V] 10...30 DC
电流损耗 [mA] 20
光线种类 红光
防护等级 III
反相保护 是
输出
输出功能 light-on模式
电压降 [V] < 2.5
电流负载 [mA] 200
短路保护 是
过载保护 是
开关频率 [Hz] 1000
监控范围
光斑直径 [mm] 25 ( 在的检测距离 )
测量/设定范围
设定范围 [mm] 70...400
环境条件
环境温度 [°C] -25...60
外壳防护等级 IP 65 )
认证/测试
EMC电磁兼容 EN 60947-5-2
MTTF [年] 894
机械技术数据
外壳材料 外壳: ABS
透镜材料 PMMA
重量 [kg] 0.144
显示器/操作件
开关状态显示 LED 黄色
电气连接
接口 M12接插件
接线
- 接线~打印接线图~
附件
配件(同时供货) 2个固定螺母
注释
注释 ) 与相应的接插件连接
德国IFM光电传感器，OGT102
1 Preliminary note
1.1 Symbols used
. Instruction
> Reaction, result
→ Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The diffuse reflection sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: → packaging or data sheet.
3 Installation
1: LED
2: setting potentiometer
. Align the diffuse reflection sensor to the object to be detected.
. Secure it to a bracket.
4 Electrical connection
The unit must be connected by a qualified electrician.
. The national and international regulations for the installation of electrical
equipment must be adhered to.
. Ensure a voltage supply according to EN 50178, SELV, PELV.
. Disconnect power.
. Connect the unit as follows:
Settings
1: LED
2: setting potentiometer
. Set the setting potentiometer to the minimum range.
. Position the object to be detected in the detection zone.
. Increase the range until the LED lights (= minimum value; object detected).
. Remove the object from the detection zone.
> LED goes out.
. Increase the range until the LED lights (= maximum value; background detected).
. Set the range to the middle position between minimum value and maximum
value.
5 Operation
. Check whether the unit operates correctly.
. Dark-on switching units: the output is switched / the yellow LED is lit when no
object is detected.
. Light-on switching units: the output is switched / the yellow LED is lit when an
object is detected.
德国IFM光电传感器，OGT102
