德国IFM电感式传感器，IM0011
电 话：O2 13952 9829/3O8O1O
传 真：O2 16O83 1959
手 机：189 1857 2467
QQ：125 5O9 6653
联 系人：张海情
邮 箱：8010@shqiantuo.com.cn
IME2015BFBOA
电感式传感器
矩形塑料
接线端子
感应距离 15 mm [f]
齐平安装
电气设计 AC/DC
输出功能 常开 / 常闭可选
工作电压 [V] 20...250 AC/DC
负载电流(持续的) [mA] 350 AC (...50 °C) / 250 AC (...80 °C) / 100 DC
负载电流 (值) [mA] î: 2.2 A (20 ms / 0.5 Hz)
小的负载电流 [mA] 5
短路保护 否
反相保护 否
过载保护 否
电压降 [V] < AC 6.5 / < DC 6
漏电流 [mA] < 2.5 (AC 250 V) / < 1.3 (AC 110 V) / < 0.8 (DC 24 V)
实际感应距离 (Sr) [mm] 15 ± 10 %
工作距离 [mm] 0...12.1
开关点偏移 [Sr的百分比] -10...10
迟滞 [Sr的百分比] 1...15
开关频率 [Hz] 20 AC / 55 DC
修正系数 钢(St37) = 1 / 不锈钢约0.7 / 黄铜约0.4 / Al 约 0.3 / Cu约0.2
环境温度 [°C] -25...80
防护等级 IP 65, II
EMC电磁兼容 EN 60947-5-2
EN 55011: 等级B
MTTF [年] 603
外壳材料 PPE
功能显示
开关状态 LED 黄色
接口 接线端子至2.5 mm²; 电缆直径 7...13 mm, 电缆螺旋套管接头M20 x 1.5
重量 [kg] 0.188
注释 建议: 短路后请一定检查产品的安全功能。
有效区的5个位置可选
接线
请根据IEC60127-2**页中的指导标准，使用小型保险丝
≤ 2 A (快速使用)
德国IFM电感式传感器，IM0011
This sensor detects metals without contact and indicates their presence by providing
a switched signal. The nominal sensing range (Sn) can be seen in the type
designation on the type label on the unit; operating distance (Sa) 0 ... 0,81 x Sn;
(values based on standard measurement with mild steel; a shorter sensing range
for other metals).
Screw the proximity switch to a firm
base. If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (fig. 1 and 2).
When mounted in metal, the metal must
not protrude over the sensing face.
• Open space in front of the sensing
face when mounted in metal: fig. 3.
• Minimum distance when several
sensors of the same type are
mounted: fig. 4 and 5.
Disconnect power before connecting the sensor. Open the sensor (fig. 6);
connect cable in accordance with the instructions on the type label.
德国IFM电感式传感器，IM0011
