德国IFM电感式传感器，IV5049
电 话：O213952 9829/3O8O1O
传 真：O216O83 1959
手 机：189 1857 2467
QQ：125 5O9 6653
联 系人：张海情
邮 箱：8010@shqiantuo.com.cn
IVE4020BCPKG
电感式传感器
矩形塑料
接线端子
Viton密封圈
感应距离 20 mm [f]
齐平安装
电气设计 DC PNP
输出功能 NO+NC
工作电压 [V] 10...60 DC
电流负载 [mA] 200
短路保护 脉冲
反相保护 是
过载保护 是
电压降 [V] < 3
电流损耗 [mA] < 20 (24 V)
实际感应距离 (Sr) [mm] 20 ± 10 %
工作距离 [mm] 0...16.2
开关点偏移 [Sr的百分比] -10...10
迟滞 [Sr的百分比] 1...15
开关频率 [Hz] 150
修正系数 钢(St37) = 1 / 不锈钢约0.7 / 黄铜约0.4 / Al 约 0.3 / Cu约0.2
环境温度 [°C] -25...70
防护等级 IP 67, II
EMC电磁兼容 EN 60947-5-2
EN 55011: 等级B
外壳材料 PBT
功能显示
开关状态 LED 黄色
运行 LED 绿色
接口 接线端子至2.5 mm²; 电缆直径 7...13 mm, 电缆螺旋套管接头M20 x 1.5
重量 [kg] 0.256
注释 有效区的5个位置可选
单独订购电缆螺旋套管接头(E11270)
德国IFM电感式传感器，IV5049
Function and features
This sensor detects metals without contact and indicates their presence by
providing a switched signal. Nominal sensing range (Sn): see type lable; Operating
distance 0...[Sn x 0.81] mm (values based on standard measurement with mild
steel; a shorter sensing range for other metals).
Installation
Screw the sensor to a firm base.
If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (fig. 1 and 2).
Open space around the sensing face
when mounted in metal: fig. 3.
Minimum distance when several
sensors of the same type are
mounted: fig. 4 and 5.
Electrical connection
Disconnect power before connecting the sensor. Open the sensor (fig. 6);
connect the cable in accordance with the instructions on the type lable.
Use cable gland to maintain protection IP67; cable gland not supplied.
Operation
Check the safe functioning of the sensor.
The green LED is lit when the supply voltage is applied.
The yellow LED is lit when the output is switched.
The operation of the sensor is maintenance-free. For perfect functioning make
sure that:
the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwards;
EMC: The unit conforms to the requirements of EN 60947-5-2.
德国IFM电感式传感器，IV5049
