P+F旋转编码器，倍加福增量型编码器，RHI58N-0BAK1R61N-00500
特性
工业标准外壳Ø58 mm
至5000 ppr
轴套型
10 V ... 30 V 供电，推挽式输出带短路保护
产品描述
这种增量型编码器的兼容性好。
这种增量型编码器配置了所有6 通道的输出,因此, 它通常可以满足许多不同的应用。
着眼于它的设计, 在许多时候允许我们提供快速的交货期和有吸引力的价格。
脉冲盘通常在1500 线以下使用塑料盘，超过500 线, 将使用玻璃盘。
这种增量型编码器使用空心轴套，轴直径为10mm, 12 mm 或15 mm。
编码器用转矩支持来防止它旋转。
电气连接使用电缆连接器。
技术参数
一般说明
脉冲数(ppr) 5000
电气特性
工作电压10 ... 30 V DC
空载电流I0 60 mA
输出
输出形式推挽，增量型
电压降Ud < 3 V
工作电流每通道40 mA, 短路保护（不带Ub), 反极性保护
输出频率200 kHz
上升沿时间400 ns
连接形式
电缆电缆Ø7.8 mm, 6 x 2 x 0.14 mm2, 1 m
环境条件
工作温度-5 ... 80 ºC (268 ... 353 K), 可移动电缆
-20 ... 80 ºC (253 ... 353 K), 固定电缆
储藏温度-40 ... 100 ºC (233 ... 373 K)
机械特性
材料
外壳铝粉涂层
法兰铝3.1645
轴不锈钢1.4305
旋转速度6000 min-1
瞬时惯量≤ 40 gcm2
起动扭矩≤ 1.5 Ncm
轴负载
轴向偏移1 º
径向偏移1 mm
P+F旋转编码器，倍加福增量型编码器，RHI58N-0BAK1R61N-00500
Features
Industrial standard housing Ø58 mm
Up to 5000 ppr
Hollow shaft
10 V ... 30 V with short-circuit proof push-pull output
Description
Compatibility says it all for this incremental rotary encoder.
All six output channels are fitted for this incremental rotary encoder. It can thus be used universally in many different applications.
Focussing on the designs that are most often required has allowed us to offer rapid availability at an attractive price.
Usually the pulse disk is designed in plastic up to 1500 pulses. Beyond that, glass is used.
This incremental rotary encoder is available as hollow shaft design with a shaft Ø10 mm or Ø12 mm.
The rotary encoder is held in place by an included torque rest.
The electrical connection is made with a cable connector.
Technical data
General specifications
Detection type photoelectric sampling
Pulse count max. 5000
Functional safety related parameters
MTTFd 140 a
Mission Time (TM) 20 a
L10h 70 E+9 at 6000 rpm
Diagnostic Coverage (DC) 0 %
Electrical specifications
Operating voltage UB 10 ... 30 V DC
No-load supply current I0 max. 60 mA
Output
Output type push-pull, incremental
Voltage drop Ud < 3 V
Load current max. per channel 40 mA , short-circuit protected, reverse
polarity protected
Output frequency max. 200 kHz
Rise time 400 ns
Connection
Cable Ø7.8 mm, 6 x 2 x 0.14 mm2, 1 m
Ambient conditions
Operating temperature
Glass disk -5 ... 80 °C (23 ... 176 °F) , movable cable
-20 ... 80 °C (-4 ... 176 °F), fixed cable
Plastic disk -5 ... 60 °C (23 ... 140 °F) , movable cable
-20 ... 60 °C (-4 ... 140 °F), fixed cable
Storage temperature
Glass disk -40 ... 85 °C (-40 ... 185 °F)
Plastic disk -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
Housing powder coated aluminum
Flange 3.1645 aluminum
Shaft Stainless steel 1.4305 / AISI 303
Mass approx. 290 g
Rotational speed max. 6000 min -1
Moment of inertia ≤ 40 gcm2
Starting torque ≤ 1.5 Ncm
Shaft load
Angle offset 1 °
Axial offset max. 1 mm
P+F旋转编码器，倍加福增量型编码器，RHI58N-0BAK1R61N-00500
